aps01 Posted January 25, 2013 Report Posted January 25, 2013 the ride became a blend of many things:good ride quality-no bouncing and knocking on normal road dents-good body roll control and the ability to get it about 2 inches higher to compensate with extra weight without making it super stiff and undrivable '92 toy rolla EE90/AE92 1.3lt 12 x 8inch beyma (mids) 6 x beyma CP21-F tweeters(highs) 4 x 15 SPL Dynamics SPL380 D2(walled) 2 x ESX Vision 2500.2(mids,highs) 1 x SPL Dynamics D9-XS(subs) 4 x stinger SPV70 + 5 X SVR platinum 3500P batts 157.2 official on db drag comp-157.3 on same comp but eliminated...still a work in progress... Team Hxomania Trikala http://www.stevemeadedesigns.com/board/topic/156885-lil-noisy-toy-rolla/
aleroking Posted January 26, 2013 Author Report Posted January 26, 2013 the ride became a blend of many things:good ride quality-no bouncing and knocking on normal road dents-good body roll control and the ability to get it about 2 inches higher to compensate with extra weight without making it super stiff and undrivable thanks man sounds good ill have to look into that 2 fi btl 18s on 2 crescendo 3500s walled in a 2dr 2000 alero build log http://www.stevemeadedesigns.com/board/topic/141663-2-walled-btls-18-on-7k-in-a-2000-2dr-alero/
aleroking Posted January 26, 2013 Author Report Posted January 26, 2013 will start bondo on this door tomorrow got my amp for the 6.5"s in 2 fi btl 18s on 2 crescendo 3500s walled in a 2dr 2000 alero build log http://www.stevemeadedesigns.com/board/topic/141663-2-walled-btls-18-on-7k-in-a-2000-2dr-alero/
aleroking Posted January 28, 2013 Author Report Posted January 28, 2013 such a tight fit not room for anything else good seat clearance still need to cut out the tweeter holes and bondo 2 fi btl 18s on 2 crescendo 3500s walled in a 2dr 2000 alero build log http://www.stevemeadedesigns.com/board/topic/141663-2-walled-btls-18-on-7k-in-a-2000-2dr-alero/
aleroking Posted February 1, 2013 Author Report Posted February 1, 2013 got my tweets in comparison pic vs selenium st350 and crescendo xst2 2 fi btl 18s on 2 crescendo 3500s walled in a 2dr 2000 alero build log http://www.stevemeadedesigns.com/board/topic/141663-2-walled-btls-18-on-7k-in-a-2000-2dr-alero/
aleroking Posted February 3, 2013 Author Report Posted February 3, 2013 sprayed it with some cheap paint to see any un level spots better door #2 2 fi btl 18s on 2 crescendo 3500s walled in a 2dr 2000 alero build log http://www.stevemeadedesigns.com/board/topic/141663-2-walled-btls-18-on-7k-in-a-2000-2dr-alero/
aleroking Posted February 5, 2013 Author Report Posted February 5, 2013 getting close just need to sand a few spots a tiny and fill in some pin holes on top.door #2 who likes my new sticker? 2 fi btl 18s on 2 crescendo 3500s walled in a 2dr 2000 alero build log http://www.stevemeadedesigns.com/board/topic/141663-2-walled-btls-18-on-7k-in-a-2000-2dr-alero/
aleroking Posted February 5, 2013 Author Report Posted February 5, 2013 would you guys paint or wrap these?im just worried if i paint them about getting cracks in the fiberglass eventually.and wrapping them would cover up any small imperfections. 2 fi btl 18s on 2 crescendo 3500s walled in a 2dr 2000 alero build log http://www.stevemeadedesigns.com/board/topic/141663-2-walled-btls-18-on-7k-in-a-2000-2dr-alero/
memphisBred Posted February 6, 2013 Report Posted February 6, 2013 Wrapping them will show imperfections as well. Just keep at the sanding until its perfect. SMD Super Seller/Buyer Audison----Hertz----Rainbow
CJSmith Posted February 6, 2013 Report Posted February 6, 2013 Sick build, can't wait to see it finished! *Rebuid in progress*
Recommended Posts
Archived
This topic is now archived and is closed to further replies.