bumassjeff Posted May 11, 2012 Report Posted May 11, 2012 Alright well I currently was in the market for a 2-3k RMS 18" but after looking at how sexy those damn SA-8 V2s are I was shifting more towards doing 4 8's instead. I have a DAT 2500.1 prototype to power them. Now I've owned an 18" BTL before but never a set of 8's, just wanted to hear what the crowd here had to say about my change of plans. YAY? or NAY? lol
iceman1575 Posted May 11, 2012 Report Posted May 11, 2012 Alright well I currently was in the market for a 2-3k RMS 18" but after looking at how sexy those damn SA-8 V2s are I was shifting more towards doing 4 8's instead. I have a DAT 2500.1 prototype to power them. Now I've owned an 18" BTL before but never a set of 8's, just wanted to hear what the crowd here had to say about my change of plans. YAY? or NAY? lol Less cone area if you're only doing 4. But they are beasty little fuckers, that's for sure. POTATO!
bumassjeff Posted May 11, 2012 Author Report Posted May 11, 2012 Yeah, understand less cone area. But 4 8's would look sexy all bumpin together. Or I could snag 6 8's that would push me over the cone area for an 18" hehe
bumassjeff Posted May 12, 2012 Author Report Posted May 12, 2012 BUMP! Anyone else willing to chime in? I'd like to hear from people who have played with these little 8's.
bumassjeff Posted May 14, 2012 Author Report Posted May 14, 2012 Good information to know, would anyone be willing to sketch me up a box maybe? Max dimensions are 20H x 40W x 20D. Would be much appreciated!
Joe X Posted May 14, 2012 Report Posted May 14, 2012 Sure: Enclosure Specifications: Fb = 34 Hz Vb = 2.42 ft^3 External Height = 11 in External Width = 40 in External Depth = 19 in Port Width = 3 3/4 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Front & Back (3 parts) = 40 x 11 Left & Right Sides = 16 3/4 x 9 1/2 Top & Bottom = 40 x 16 3/4 L Port Internal Assembly Parts: Front to Back = 13 x 9 1/2 Extension = 8 x 9 1/2
bumassjeff Posted May 14, 2012 Author Report Posted May 14, 2012 Sure: Enclosure Specifications: Fb = 2.42 Hz Vb = 34 ft^3 External Height = 11 in External Width = 40 in External Depth = 19 in Port Width = 3 3/4 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Front & Back (3 parts) = 40 x 11 Left & Right Sides = 16 3/4 x 9 1/2 Top & Bottom = 40 x 16 3/4 L Port Internal Assembly Parts: Front to Back = 13 x 9 1/2 Extension = 8 x 9 1/2 Snappy responses! Appreciate the draw out and specs. What is this tuned to?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.