SMD VM-1 LED Volt Meter! (its back!) Pics/short vid pg. 19 (new update pg 35)

[Polarbear]

i got the bill in the mail but still no confirmation number.. when are you gonna be shipping them all out steve?

[meade916]

i got the bill in the mail but still no confirmation number.. when are you gonna be shipping them all out steve?

everyone who ordered one should have one on the way. Eveyone who didn't already get theirs should have tracking by now. Check the email you used to register.

what is your order number? ill look it up.

[Polarbear]

i dont have an email that you sent with an order number. i ordered it dec 30th.

Edited January 12, 2013 by Polarbear

[Polarbear]

it should be shipping to 52761 if that helps..

[meade916]

nope, that don't help. If you don't have an order number then you probably don't have an order. Feel free to email jason at [email protected] and give us all the information you have that would match your order, and we will see if there is one in the system.

[Polarbear]

alright will do.. i just emailed him

Edited January 12, 2013 by Polarbear

[crunkjuice1]

hooked it up while at work couln't wait! turned out great. I got out about 15min ago so sun was already down and wanted to show how it looks at night. even at the angle it sits the lights are not bothersome at all I think from what we had seen it was just the camera lens "ringing" the lights. I took a pic with the phone but it does no justice as it is in person. Thanks again Steve Tony Juan and Jaybird for putting in work on this voltage meter

I used 3M double sided stickie similar to what is used to hold up the car alarm two way antenna to the glass. Direct swap from a stinger that read 15.1v now its 14.6v

Edited January 13, 2013 by crunkjuice1

[HunterJohnson]

I'll, play. It is much bigger than my original VM check out the difference and I still wired it to a switch so I can turn it on and off. I might do some molding and make it flush...well see

Before,

After,

Edited January 13, 2013 by HunterJohnson

[kicker8940]

I should have mine hooked up and running one day this week,was working on a custom piece so i could mount it.

And before i could finish the fuel pump on my blazer quit working so i had to put it in the shop.

Now i have a couple of questions,i have never posted pics or videos to a forum before.

Can i upload pics from my computer or do i have to use a pic hosting site.

And how would i upload a video,i'm sure i would upload the video to my youtube account first.

Just don't know what to do after that.

Edited January 14, 2013 by kicker8940

[Lbox88]

upload pics to photobucket.com, then view the pic and copy the link on the right of the photo to here.

Video upload to youtube and copy/paste the link here.