yUmadBro Posted June 12, 2012 Author Report Posted June 12, 2012 Is that grey area on the back of the seat an opening into the trunk or does the whole seat fold down? The back seats fold down but the dark gray area in the middle there also opens into an arm rest inside the cabin
quakecitystudio Posted June 12, 2012 Report Posted June 12, 2012 I noticed you didn't include a couple of measurements: from left to right inside the trunk but directly behind the rear seats along the floor, and then from left to right inside the wheel well walls. Also distance from rear seat to edge of wheel well inside trunk. Bass Music Producer • Photographer • Graphic Designer -------------- Deep Sector Boom...
yUmadBro Posted June 12, 2012 Author Report Posted June 12, 2012 10" back seat opening along floor 33" along the floor of the rear seats 39" from left wheel well to right wheel well did i miss one?
Joe X Posted June 12, 2012 Report Posted June 12, 2012 No one has ever given more dims for a design that I can remember.
quakecitystudio Posted June 12, 2012 Report Posted June 12, 2012 Did this measurement. It's a sealed enclosure for the sub, but a t-line for the front of the woofer and the line is about 37 hz. The port area and whole line is the same - 153.86 Over all box size is 26" wide x 38.5" deep x 21" tall. The subwoofer chamber is 8" deep x 21" long and 19.5" tall Bass Music Producer • Photographer • Graphic Designer -------------- Deep Sector Boom...
yUmadBro Posted June 12, 2012 Author Report Posted June 12, 2012 Did this measurement. It's a sealed enclosure for the sub, but a t-line for the front of the woofer and the line is about 37 hz. The port area and whole line is the same - 153.86 Over all box size is 26" wide x 38.5" deep x 21" tall. The subwoofer chamber is 8" deep x 21" long and 19.5" tall wow that design looks awesome. both designs seem really efficient. i'm planning the build for sometime next week so i do have some thinking to do. but it the meantime i did get these in from fed ex today
yUmadBro Posted June 28, 2012 Author Report Posted June 28, 2012 I'm looking for a bit of a different design.. I'd either like to kind of center the sub OR some aero ports through the backseat opening or the back seat cupholder fold out. Pretty sure I have enough measurements posted already but if i dont please let me know. Skar suggests a 35 hz tuning for a ported enclosure but I know the design im looking for will affect the tuning. The subwoofers going to be ran off a hifonics zeus 500.2. I dont have a preference about subs or aeros facing up or forward. Just either really would like the sub in the opening in the pic below or the aero ports through the cupholder slot. Anyone who might wanna take a shot at a design would be great I can't really work with sketchup to well. Thanks for any input.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.