b-dubs89 Posted June 16, 2012 Report Posted June 16, 2012 another thread got me thinking about this , any one have any idea what or if a guy should pay for termlab metering Quote
skittlesRgood Posted June 16, 2012 Report Posted June 16, 2012 at a shop? $10-15 is what i would imagine Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people.
Guest Posted July 2, 2012 Report Posted July 2, 2012 Competition term labs are about 500 usd. You can buy a db meter for about 50 but its a few db off Quote
bdog Posted July 2, 2012 Report Posted July 2, 2012 where can u find a cheap db meter that goes up to 150db? Quote REP
HunterJohnson Posted July 2, 2012 Report Posted July 2, 2012 where can u find a cheap db meter that goes up to 150db? lol i've NEVER seen one that does 150db and at a shop $10, I'd pay $20 if they have a fridge with some cold beers Quote Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
bumonskateboard6 Posted July 2, 2012 Report Posted July 2, 2012 where can u find a cheap db meter that goes up to 150db? Simple answer is nowhere, Termlabs use a pressure sensor not a microphone. There's some Russian company Called SPL Labs that I think made a good meter that was close to the termlab. Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also?
Guest Posted July 2, 2012 Report Posted July 2, 2012 Your best bet is to find a local shop that has a real term lab and pay for them to meter it. Unless you want to.drop 500 Quote
purplesyrup Posted July 2, 2012 Report Posted July 2, 2012 a local shop here, the only one with any sort of meter has an audiocontrol, they want me to rent one of they're bays at $60 an hour with a 1/2 hour minimum charge, so $30, kinda wack its not even a termlab it would be worth it for fine tuning but it seems kinda shady Quote
purplesyrup Posted July 2, 2012 Report Posted July 2, 2012 yea, I want to take time, find the sweet spots (hz) and try to get the most out of it Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.