fi/psi 18 enclosure

[john253a]

42w x26d x16h 1.5" thick(2x 0.75")

2x 6" aero 17" (18 flared length)

Sub up, port back

Can't give you exact numbers as I'm mobile but it should be around 6.2net at 33.5hz

If you had a bit more space you'll have a lot more options

[john253a]

[SMZ2]

Could you give me a sketch please just to help visualize when you get a chance

[252chevyboyz]

@John: wow man good job with Torre's. I def couldn't have done any better myself and the one tuned to 34.9hz looks like it would be the loudest. I was thinkin right around 36hz to be hell on the ears haha but it may not pick up the lows like the 32hz tune.

-James

[john253a]

[john253a]

just throwing some options out there

of course nothing is in stone so it all can be changed to suit

[252chevyboyz]

Got some skills drawing up which I don't really have. Nice job on the designs and didn't take much time to do well compared to me haha. Anyway I the one witht he slot port at the bottom looks awsome but I like the bottom located ports. Wouldn't the aero ports give him more adjustablity by changing the length of the port? I'm still a noob when it comes to aero ports

[john253a]

also with port up you can go bigger all the way to back door, unless you need the space for amps or batteries

[john253a]

Wouldn't the aero ports give him more adjustablity by changing the length of the port? I'm still a noob when it comes to aero ports

yes if he used pvc,

the psp only come in 17" (18" long end-end with flare) so there no, normally i like to use use 3x6" for 6-7net but this design doesnt allow for it,

you'll also get a higher net with aero for 2 reasons, less port wall to take up space and lower sq" is required due to the efficiency of the port design

Edited June 28, 2012 by john253a

[SMZ2]

I'm liking the third one you posted that was tunned to like 32hz with the slot port on the side