john253a Posted June 28, 2012 Report Share Posted June 28, 2012 42w x26d x16h 1.5" thick(2x 0.75") 2x 6" aero 17" (18 flared length) Sub up, port back Can't give you exact numbers as I'm mobile but it should be around 6.2net at 33.5hz If you had a bit more space you'll have a lot more options Quote Link to comment Share on other sites More sharing options...
john253a Posted June 28, 2012 Report Share Posted June 28, 2012 Quote Link to comment Share on other sites More sharing options...
SMZ2 Posted June 28, 2012 Author Report Share Posted June 28, 2012 Could you give me a sketch please just to help visualize when you get a chance Quote My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
252chevyboyz Posted June 28, 2012 Report Share Posted June 28, 2012 @John: wow man good job with Torre's. I def couldn't have done any better myself and the one tuned to 34.9hz looks like it would be the loudest. I was thinkin right around 36hz to be hell on the ears haha but it may not pick up the lows like the 32hz tune. -James Quote - 1997 Chevy Tahoe- Big 3 (1/0)- Dual Autocraft Batts- JVC KD-A315 HU- AQ 2200.1D- 18" AQ HDC3- Box w/ Removable Port (6ft^3 @ 36hz & 6.7ft^3 @ 42hz)- 39' 1/0 & 13' 2/0 Flex-A-Prene My Selling Feedback Build Log Link to comment Share on other sites More sharing options...
john253a Posted June 28, 2012 Report Share Posted June 28, 2012 Quote Link to comment Share on other sites More sharing options...
john253a Posted June 28, 2012 Report Share Posted June 28, 2012 just throwing some options out there of course nothing is in stone so it all can be changed to suit Quote Link to comment Share on other sites More sharing options...
252chevyboyz Posted June 28, 2012 Report Share Posted June 28, 2012 Got some skills drawing up which I don't really have. Nice job on the designs and didn't take much time to do well compared to me haha. Anyway I the one witht he slot port at the bottom looks awsome but I like the bottom located ports. Wouldn't the aero ports give him more adjustablity by changing the length of the port? I'm still a noob when it comes to aero ports Quote - 1997 Chevy Tahoe- Big 3 (1/0)- Dual Autocraft Batts- JVC KD-A315 HU- AQ 2200.1D- 18" AQ HDC3- Box w/ Removable Port (6ft^3 @ 36hz & 6.7ft^3 @ 42hz)- 39' 1/0 & 13' 2/0 Flex-A-Prene My Selling Feedback Build Log Link to comment Share on other sites More sharing options...
john253a Posted June 28, 2012 Report Share Posted June 28, 2012 also with port up you can go bigger all the way to back door, unless you need the space for amps or batteries Quote Link to comment Share on other sites More sharing options...
john253a Posted June 28, 2012 Report Share Posted June 28, 2012 (edited) Wouldn't the aero ports give him more adjustablity by changing the length of the port? I'm still a noob when it comes to aero ports yes if he used pvc, the psp only come in 17" (18" long end-end with flare) so there no, normally i like to use use 3x6" for 6-7net but this design doesnt allow for it, you'll also get a higher net with aero for 2 reasons, less port wall to take up space and lower sq" is required due to the efficiency of the port design Edited June 28, 2012 by john253a Quote Link to comment Share on other sites More sharing options...
SMZ2 Posted June 29, 2012 Author Report Share Posted June 29, 2012 I'm liking the third one you posted that was tunned to like 32hz with the slot port on the side Quote My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.