caraudiolove Posted June 27, 2012 Report Share Posted June 27, 2012 (edited) BASS INFERNO BI4400 CAR AUDIO 4400W 2CH PRO AMPLIFIER Dynamic Power 14.4 Volts 2 x 1100 Watts @ 4 Ohms Dynamic Power 14.4 Volts 2 x 2200 Watts @ 2 Ohms Dynamic Power 14.4 Volts 1 x 4400 Watts @ 4 Ohms Bandwith: 20-28Khz X-Over Slope: 12 dB Bass Boost @ 45 Hz: 12 dB Input Sensitivity: 0.2MV-6V Input Voltage: 11-14.4 Volts Signal to Noise Ratio: >95 dB THD at Rated Power: < 0.05% Seller's SKU: BI4400PRO Features: Class "AB" Circuitry Pro Audio Grade Components High Efficiency Mosfet Outputs On-Board (Fully Variable) High / Low X-Over Enhanced Dynamic Performance 2 Ohms Stereo Cpability WOULD IT BE A GOOD SUB AMP? Edited June 27, 2012 by caraudiolove Quote Link to comment Share on other sites More sharing options...
Chris Hammer Posted June 27, 2012 Report Share Posted June 27, 2012 Just by the name my vote is NO. But Imma look it up right now....my bet is its a 4400w MAX AB amp Quote MY BUILD *****http://tinyurl.com/gmcbuild***** Vehicles 2005 GMC Canyon CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.) crf250r - Used to be race bike..now I just trail ride..practice at the track on it. CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg Sold to: Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585 Shower farts still piss me off.I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot. Link to comment Share on other sites More sharing options...
just1moreamp Posted June 27, 2012 Report Share Posted June 27, 2012 Just say NO..........to BASS INFERNO........ Quote Link to comment Share on other sites More sharing options...
CFAIST Posted June 27, 2012 Report Share Posted June 27, 2012 They are built by DB Drive I believe. I can get em through one of my distributers just never have. I have heard one an some kicker L7s and it sounded fairly clean but was lacking in the delivery. Probably better off getting something else. Just my $0.02 Quote C.A.R. AUDIO Faist Audio Concepts F.A.C. 96 Escort wagon Murdered out (redneck style) Eclipse HU, CDT classic Components ED Nine.2, Hifonics 1608d (borrowed) 2 Powerbass M 15"s 6 cubes tuned to 30 hz 2005 State record holder 0-600 Consumer 143.7 USACi Kick (1 Soundstream SPL15, JL e1200) 2009 3rd Loudest 0-1000 Trunk In Iowa USACi 145.00 kick. (4 Powerbass PS-10's US AMPS MD3D) 146.2db Unofficial. 6-ps-10's MD3D. Personal best 150.9DB 4 Powerbass M-15Ds. American Bass VFL150.1 at .5 ohm 2010 Usaci 0-1000 mod Iowa state record holder 149.4DB Check out my youtube channel CFAIST1 Link to comment Share on other sites More sharing options...
Chris Hammer Posted June 27, 2012 Report Share Posted June 27, 2012 (edited) Its got a 70amp fuse. At 14.4volts you might get 1000w but it would probably be clipped. Just for comparison sake...my old BRZ1200 was fused for 140 amps....double the fuses for 1200w....the fuses dont tell you exactly the output of the amp will be but it couldnt push anywhere close to 4400 watts before popping the 70 amp fuse. General rule is..if the price looks to good to be true it probably is. http://www.amazon.com/gp/product/B007TEZVYK/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B0072LBS2O&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QB3DHBX7AQ0T1QEJ3J9 Edited June 27, 2012 by Chris Hammer Quote MY BUILD *****http://tinyurl.com/gmcbuild***** Vehicles 2005 GMC Canyon CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.) crf250r - Used to be race bike..now I just trail ride..practice at the track on it. CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg Sold to: Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585 Shower farts still piss me off.I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot. Link to comment Share on other sites More sharing options...
8ight Posted June 27, 2012 Report Share Posted June 27, 2012 Dynamic power = Peak power. I doubt that amp will do RMS either, you'd be better off with Planet Audio or Audiopipe for cheap power, but it won't be very clean. Quote I'm gonna hate Link to comment Share on other sites More sharing options...
Chris Hammer Posted June 27, 2012 Report Share Posted June 27, 2012 How much power do you really need? What subs are you looking at running....what kind of electrical do you have? Tell us about your ride and someone can help you out with choosing a better amplifier. Quote MY BUILD *****http://tinyurl.com/gmcbuild***** Vehicles 2005 GMC Canyon CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.) crf250r - Used to be race bike..now I just trail ride..practice at the track on it. CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg Sold to: Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585 Shower farts still piss me off.I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot. Link to comment Share on other sites More sharing options...
caraudiolove Posted June 28, 2012 Author Report Share Posted June 28, 2012 2,000w/ fi ssd or psi 12" platfrom 3/ 4gauge wire have 4/0 to be able to use if u know anyone that makes kinda like wire reducers but for 4/0 / and i have a 1999 monte carlo NEED HELP ON FIBERGLASSING DOOR PANELS I'LL SEND YOU A PICTURES OF THE DOORS if you would help? About the 4/0 cable do u know anyone that does custom cnc work ill by the aluminum Quote Link to comment Share on other sites More sharing options...
newls1 Posted June 28, 2012 Report Share Posted June 28, 2012 this thread is confusing me.... how do we go from asking about a POS amp, to doing fiberglass work, and then aluminum cnc work too ... just sayin Quote I love my staffie So anti FACEBOOK it isn't even funny Link to comment Share on other sites More sharing options...
caraudiolove Posted June 28, 2012 Author Report Share Posted June 28, 2012 just seeing what they can help me with Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.