Jskiles Posted July 9, 2012 Report Share Posted July 9, 2012 So my friend has a 04 Silverado and he has 2 12 inch kickers cvrs that he's wanting me to install in his truck. He's above 6 feet tall so his seat is almost to the back leaving me at about 7 inches from seat to back. I don't think there's enough room for both of the subs but here's the specs for space. 62-22-7 Quote 2010 Kia Forte Koup (Slow Build) 2 Sundown SCV-3000D 2 DC XL M1 with PSI reconesFocal R-165s2 on Orion 4800-HPKenwood KDC-X798Knukonceptz OFC 1/0Audiotechnix,Fatmat and Q-mat Deadener XS power D3400 up front 3 D3100s power in trunkStock 110 amp alt 2013 Scion TC 2 Dc lvl 3s with xl coils on Soundqubed 2200 Sundown components AA 50.2 for components Pioneer FH-X700BT Knukonceptz OFC 1/0 Fatmat and Q-mat Deadener XS Power D3100 up front D925 in back Mechman 240 alt http://www.stevemeadedesigns.com/board/topic/189911-2013-scion-tc-build/ <Scion TC Build http://www.stevemeadedesigns.com/board/topic/174094-jskiles-forte-koup/ <Slow Kia Forte Buildhttp://www.stevemead...ockUserAgent__1 < Old build 2005 Equinox Link to comment Share on other sites More sharing options...
john253a Posted July 10, 2012 Report Share Posted July 10, 2012 Use behind the seat and extend it and port into the centre console Quote Link to comment Share on other sites More sharing options...
Aaron Tuck TBA Posted July 10, 2012 Report Share Posted July 10, 2012 Ive got a thought!?! Some might not agree but an idea i had. internal view outer view can be changed if wanted im not the experienced at box designing but i try and you got to start somewhere right? hope this helps Quote 2000 Cavalier 4 doorXS D925XS D2400XS D31004 runs of 1/0 Mechman 270 2 DD 9515js Link to comment Share on other sites More sharing options...
Jskiles Posted July 10, 2012 Author Report Share Posted July 10, 2012 Use behind the seat and extend it and port into the centre console His girlfriend sits in the middle seat seat and refuses to sit anywhere else lol. I was going to build a box for the subs in the center but that's out of the question now. Quote 2010 Kia Forte Koup (Slow Build) 2 Sundown SCV-3000D 2 DC XL M1 with PSI reconesFocal R-165s2 on Orion 4800-HPKenwood KDC-X798Knukonceptz OFC 1/0Audiotechnix,Fatmat and Q-mat Deadener XS power D3400 up front 3 D3100s power in trunkStock 110 amp alt 2013 Scion TC 2 Dc lvl 3s with xl coils on Soundqubed 2200 Sundown components AA 50.2 for components Pioneer FH-X700BT Knukonceptz OFC 1/0 Fatmat and Q-mat Deadener XS Power D3100 up front D925 in back Mechman 240 alt http://www.stevemeadedesigns.com/board/topic/189911-2013-scion-tc-build/ <Scion TC Build http://www.stevemeadedesigns.com/board/topic/174094-jskiles-forte-koup/ <Slow Kia Forte Buildhttp://www.stevemead...ockUserAgent__1 < Old build 2005 Equinox Link to comment Share on other sites More sharing options...
Jskiles Posted July 10, 2012 Author Report Share Posted July 10, 2012 Ive got a thought!?! Some might not agree but an idea i had. internal view outer view can be changed if wanted im not the experienced at box designing but i try and you got to start somewhere right? hope this helps The box looks like it would work but I'm not sure on the cubic feet needed or the subs. I'll have to look at the specs of the subs Quote 2010 Kia Forte Koup (Slow Build) 2 Sundown SCV-3000D 2 DC XL M1 with PSI reconesFocal R-165s2 on Orion 4800-HPKenwood KDC-X798Knukonceptz OFC 1/0Audiotechnix,Fatmat and Q-mat Deadener XS power D3400 up front 3 D3100s power in trunkStock 110 amp alt 2013 Scion TC 2 Dc lvl 3s with xl coils on Soundqubed 2200 Sundown components AA 50.2 for components Pioneer FH-X700BT Knukonceptz OFC 1/0 Fatmat and Q-mat Deadener XS Power D3100 up front D925 in back Mechman 240 alt http://www.stevemeadedesigns.com/board/topic/189911-2013-scion-tc-build/ <Scion TC Build http://www.stevemeadedesigns.com/board/topic/174094-jskiles-forte-koup/ <Slow Kia Forte Buildhttp://www.stevemead...ockUserAgent__1 < Old build 2005 Equinox Link to comment Share on other sites More sharing options...
Aaron Tuck TBA Posted July 10, 2012 Report Share Posted July 10, 2012 The box looks like it would work but I'm not sure on the cubic feet needed or the subs. I'll have to look at the specs of the subs I looked up specs for 2 12"CVR's and with the room you got this is as close as i can get. Quote 2000 Cavalier 4 doorXS D925XS D2400XS D31004 runs of 1/0 Mechman 270 2 DD 9515js Link to comment Share on other sites More sharing options...
john253a Posted July 10, 2012 Report Share Posted July 10, 2012 Use behind the seat and extend it and port into the centre console His girlfriend sits in the middle seat seat and refuses to sit anywhere else lol. I was going to build a box for the subs in the center but that's out of the question now. What's wrong with that just tune it to the luck 33 and let her sit there Quote Link to comment Share on other sites More sharing options...
Jessica Posted July 10, 2012 Report Share Posted July 10, 2012 Where did you measure the depth? At the bottom of where the box will be or the top of where it will be. Just had to ask.Also, if they are the new cvr's , they have a mounting depthof 6 1/4 inches. So a 7" deep box will give you 6 1/4" depth to mounting them. So uh, yeah that will be close. Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Jskiles Posted July 10, 2012 Author Report Share Posted July 10, 2012 Where did you measure the depth? At the bottom of where the box will be or the top of where it will be. Just had to ask.Also, if they are the new cvr's , they have a mounting depthof 6 1/4 inches. So a 7" deep box will give you 6 1/4" depth to mounting them. So uh, yeah that will be close. I measured closer to the bottom where the subs will be. It's a really tight fit but on the passenger seat I can adjust that seat if I was gonna do one sub and make a 1 inch mounting ring if that would even work Quote 2010 Kia Forte Koup (Slow Build) 2 Sundown SCV-3000D 2 DC XL M1 with PSI reconesFocal R-165s2 on Orion 4800-HPKenwood KDC-X798Knukonceptz OFC 1/0Audiotechnix,Fatmat and Q-mat Deadener XS power D3400 up front 3 D3100s power in trunkStock 110 amp alt 2013 Scion TC 2 Dc lvl 3s with xl coils on Soundqubed 2200 Sundown components AA 50.2 for components Pioneer FH-X700BT Knukonceptz OFC 1/0 Fatmat and Q-mat Deadener XS Power D3100 up front D925 in back Mechman 240 alt http://www.stevemeadedesigns.com/board/topic/189911-2013-scion-tc-build/ <Scion TC Build http://www.stevemeadedesigns.com/board/topic/174094-jskiles-forte-koup/ <Slow Kia Forte Buildhttp://www.stevemead...ockUserAgent__1 < Old build 2005 Equinox Link to comment Share on other sites More sharing options...
Jessica Posted July 10, 2012 Report Share Posted July 10, 2012 I was just worried about the incline of the seat back being closer than 7" Trucks are such PITA to do installs on. Nothing ever fits like you think it will. If all else fails and you just cant get the sub in and get the depth you need see if he will entertain the thought of removing some plastic panels from the back wall of the truck and using the back of the cab as a back wall. I mean if you use a bunch of deadener and mayb...... no, ignore that, I'm getting ahead of myself. Best of luck with this. Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.