im45pl Posted December 28, 2012 Author Report Share Posted December 28, 2012 On the box design, I'm pretty sure the back low tuned side is supposed to be the smaller side and the 'front' side is supposed to be the larger side. And then the smaller ported side is, as a rule of thumb, around the volume of the max recommended sealed. After that try to figure out a ratio that you want/can fit such as 2:1 then to tune the large side to your resonant frequency. Simple as that hmm maybe i misread my previous advice, there is no recomended sealed for these subs, kinda sounds like a 4th your describing.. but i know nothing about bandpass TEAM DC AUSTRALIA My_Build_Log Link to comment Share on other sites More sharing options...
Pro7 Posted December 28, 2012 Report Share Posted December 28, 2012 Nah it's not a 4th I'm talkin bout. Tho that is very similar, the rear chamber is ported but it needs to be smaller that the front and from what I've read using the max recommended sealed volume works well for that. And I'm sorry the front chamber isn't tuned to resonant frequency. It is the upper cut off frequency for your wanted pass-band Edit: http://www.stevemeadedesigns.com/board/topic/89119-6th-order-dilemma/page__fromsearch__1 here's a thread talking about 6th orders I've gotten a blowjob and picked up my iphone behind her back to see what email notification I got from smd before Link to comment Share on other sites More sharing options...
WCA Rusty Posted December 28, 2012 Report Share Posted December 28, 2012 Lookin like a great build DC AUDIO Phone Number 1(855)SPL-DBZZ Built by Competitors, for Competitors. Link to comment Share on other sites More sharing options...
im45pl Posted December 28, 2012 Author Report Share Posted December 28, 2012 Nah it's not a 4th I'm talkin bout. Tho that is very similar, the rear chamber is ported but it needs to be smaller that the front and from what I've read using the max recommended sealed volume works well for that. And I'm sorry the front chamber isn't tuned to resonant frequency. It is the upper cut off frequency for your wanted pass-band cool thanks bro ill get to redesigning some stuff (everything then) TEAM DC AUSTRALIA My_Build_Log Link to comment Share on other sites More sharing options...
im45pl Posted December 28, 2012 Author Report Share Posted December 28, 2012 Lookin like a great build thanks rusty glad your liking it! looking foward to repping the brand over here in oz.. how can i get a tem dc sig? im useless at forums lol TEAM DC AUSTRALIA My_Build_Log Link to comment Share on other sites More sharing options...
WCA Rusty Posted December 28, 2012 Report Share Posted December 28, 2012 you save the pic, load it up to a photobucket type account and then copy the link to your sig section of your profile DC AUDIO Phone Number 1(855)SPL-DBZZ Built by Competitors, for Competitors. Link to comment Share on other sites More sharing options...
im45pl Posted December 28, 2012 Author Report Share Posted December 28, 2012 cheers mate ill do it now TEAM DC AUSTRALIA My_Build_Log Link to comment Share on other sites More sharing options...
im45pl Posted December 28, 2012 Author Report Share Posted December 28, 2012 Nah it's not a 4th I'm talkin bout. Tho that is very similar, the rear chamber is ported but it needs to be smaller that the front and from what I've read using the max recommended sealed volume works well for that. And I'm sorry the front chamber isn't tuned to resonant frequency. It is the upper cut off frequency for your wanted pass-band Edit: http://www.stevemead...__fromsearch__1 here's a thread talking about 6th orders thanks for the link, looks like i got mixed up on the front and rear sizes, thanks again appreciated TEAM DC AUSTRALIA My_Build_Log Link to comment Share on other sites More sharing options...
armykyle1 Posted December 28, 2012 Report Share Posted December 28, 2012 wow that's a big ass build! Nice work so far! TEAM XS POWERTEAM HEAVY HERTZMy build- http://www.stevemeadedesigns.com/board/topic/194454-e46-bmw-build-pos/#entry2914134youtube- http://www.youtube.com/user/armykyle1big build starting Link to comment Share on other sites More sharing options...
im45pl Posted February 11, 2013 Author Report Share Posted February 11, 2013 pics not working will create new post TEAM DC AUSTRALIA My_Build_Log Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.