Riley Evan Houser Posted July 16, 2012 Report Posted July 16, 2012 I have 2 SA15s in a ported box tuned to 30 hz. The sub that is on the right doesn't rattle or anything, but the sub on the left rattles when sitting the enclosure when it hits lower notes. I take it out to check to see if it still does it in free air but it doesn't, only in the box. Why would that be? Why just one and not both? If someone could help me that would be great. Thanks! Quote
CJSmith Posted July 16, 2012 Report Posted July 16, 2012 What's the size of the box, what amp, port size? Quote *Rebuid in progress*
Riley Evan Houser Posted July 16, 2012 Author Report Posted July 16, 2012 38" wide, 28" deep, 14.75" tall, Soundstream tx1.2000d, 5.5" wide with a 2" L port. Subs are mounted on top, are each getting about 500 watts rms until I put in my second battery and do the big 3 Quote
Guest Posted July 16, 2012 Report Posted July 16, 2012 make sure its screwed in right, when you take it off and put it on you want to do opposite screws, so top then bottom right then left, etc to make sure its sealed equally. Quote
Riley Evan Houser Posted July 16, 2012 Author Report Posted July 16, 2012 I feel ya man, but even when i just set it in it rattles. I'll have the top side of the sub in and the slowly set the other side down and it begins to rattle. Should I put sound deadener on the "ring" of the subwoofer? Would like help? Or should I just call Sundown? Quote
SnowDrifter Posted July 16, 2012 Report Posted July 16, 2012 You sure it's the sub and not the box? Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Riley Evan Houser Posted July 16, 2012 Author Report Posted July 16, 2012 Hmm.. I just I was just pointing fingers at the sub! But, it sounds like i put a screw on the top and let it rattle around..so I'm assuming it's the sub. How can I tell for sure? Quote
Guest Posted July 16, 2012 Report Posted July 16, 2012 make sure there are no stripped skrews that is the most kommon way it happends. Quote
Riley Evan Houser Posted July 16, 2012 Author Report Posted July 16, 2012 With or without screws it sounds the same. Quote
zack_e89 Posted July 16, 2012 Report Posted July 16, 2012 just from scanning the details here it sounds like something inside the box is coming loose behind the left sub hole maybe? did you check out the inside of your box? just trying to help Quote 97 Suburban 8 custom PSI Platform 3 18's
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.