JNells Posted January 9, 2014 Report Share Posted January 9, 2014 Lurked thru your build for some time now, posting to tune in. Nice work so far (except for your cuts on the foam template) lol just messing with ya. Keep up the good work and pics coming Malibu Build Log Link to comment Share on other sites More sharing options...
SMZ2 Posted January 9, 2014 Author Report Share Posted January 9, 2014 Thanks bro I appreciate you checking in! Yeah the foam didn't work to well haha. I have a problem... I had about half a gallon of titebond 3 left and it froze up... so it's defrosting I hope it's still safe to use. My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
SMZ2 Posted January 9, 2014 Author Report Share Posted January 9, 2014 Okay so I tested my tweeter pods todayto see if they would fit... needless to say they didn't. I really do not want to redo the pillars again but I may have to. Watching paint dry... well plastidip. . Then finally a dry fit of the side walls, battery holder, and lower back of the wall. Hopefully I will be making this permanent soon. I'm just waiting for glue to dry now and I have to attached the back to the battery rack and trim the front. I'm not sure how I will secure the batteries yet but ideas are welcome. After this is done the back will start to take shape. Then I will add the batteries and run wire to them and figure out amp placement. My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
SMZ2 Posted January 9, 2014 Author Report Share Posted January 9, 2014 This was the dry fit. My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
funky Posted January 9, 2014 Report Share Posted January 9, 2014 This was the dry fit. Hell yeah love the respirator! Got some work done! I only played around but was warm enough to test and had fun! Your not firing port back in a wall are you? Learn to live life, not just be alive! The QX build log-http://www.stevemeadedesigns.com/board/topic/178358-06-infinity-qx56-rebuild/ Carbon build-http://www.stevemeadedesigns.com/board/topic/187645-civic-wall-build-4-dc-xlm2-15s-it-is-playing-videos-on-friday-pics-updated/ Chode Box-http://www.stevemeadedesigns.com/board/topic/182547-chodes-triple-kerf-box-build-box-done-and-playing-videos-up/ Kenny's Build-http://www.stevemeadedesigns.com/board/topic/169916-k3n12ocks-05-xb-tiny-rockford-fosgate-amps-sotm-may-2014-pg-8/ Dan's Slant Box-http://www.stevemeadedesigns.com/board/topic/185711-slant-box-i-built/ You Tube-http://www.youtube.com/channel/UCGXvMZHvEhYMmyjgxpPGiJA Never do anything you would not want to explain to the paramedics! Link to comment Share on other sites More sharing options...
SMZ2 Posted January 9, 2014 Author Report Share Posted January 9, 2014 This was the dry fit. Hell yeah love the respirator! Got some work done! I only played around but was warm enough to test and had fun! Your not firing port back in a wall are you?Yeah it's saving my lungs for sure. That is the slot for the battery bank. I am seriously lacking space haha. Ehh it got in the 40s today I think. My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
funky Posted January 12, 2014 Report Share Posted January 12, 2014 Get any work done today? Learn to live life, not just be alive! The QX build log-http://www.stevemeadedesigns.com/board/topic/178358-06-infinity-qx56-rebuild/ Carbon build-http://www.stevemeadedesigns.com/board/topic/187645-civic-wall-build-4-dc-xlm2-15s-it-is-playing-videos-on-friday-pics-updated/ Chode Box-http://www.stevemeadedesigns.com/board/topic/182547-chodes-triple-kerf-box-build-box-done-and-playing-videos-up/ Kenny's Build-http://www.stevemeadedesigns.com/board/topic/169916-k3n12ocks-05-xb-tiny-rockford-fosgate-amps-sotm-may-2014-pg-8/ Dan's Slant Box-http://www.stevemeadedesigns.com/board/topic/185711-slant-box-i-built/ You Tube-http://www.youtube.com/channel/UCGXvMZHvEhYMmyjgxpPGiJA Never do anything you would not want to explain to the paramedics! Link to comment Share on other sites More sharing options...
SMZ2 Posted January 12, 2014 Author Report Share Posted January 12, 2014 Got the back of the wall permanent yesterday. It was pouring down raining though so I got stuck in the car doing this. There is a small gap in either side. I was difficult to get perfect especially closed up in the car. I will be Fiberglassing the inside of the box so it will be strong and have no leaks. I will find a way to fill in the gap on the outside too. After I wrap the back you will not be able to tell. Bear with me this is my first wall build... I feel like if I have issues like this they are easily fixed. My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
funky Posted January 12, 2014 Report Share Posted January 12, 2014 Got the back of the wall permanent yesterday. It was pouring down raining though so I got stuck in the car doing this. There is a small gap in either side. I was difficult to get perfect especially closed up in the car. I will be Fiberglassing the inside of the box so it will be strong and have no leaks. I will find a way to fill in the gap on the outside too. After I wrap the back you will not be able to tell. Bear with me this is my first wall build... I feel like if I have issues like this they are easily fixed. Everything can always be fixed never stress just keep building and correcting man Learn to live life, not just be alive! The QX build log-http://www.stevemeadedesigns.com/board/topic/178358-06-infinity-qx56-rebuild/ Carbon build-http://www.stevemeadedesigns.com/board/topic/187645-civic-wall-build-4-dc-xlm2-15s-it-is-playing-videos-on-friday-pics-updated/ Chode Box-http://www.stevemeadedesigns.com/board/topic/182547-chodes-triple-kerf-box-build-box-done-and-playing-videos-up/ Kenny's Build-http://www.stevemeadedesigns.com/board/topic/169916-k3n12ocks-05-xb-tiny-rockford-fosgate-amps-sotm-may-2014-pg-8/ Dan's Slant Box-http://www.stevemeadedesigns.com/board/topic/185711-slant-box-i-built/ You Tube-http://www.youtube.com/channel/UCGXvMZHvEhYMmyjgxpPGiJA Never do anything you would not want to explain to the paramedics! Link to comment Share on other sites More sharing options...
Trey_Dog650 Posted January 12, 2014 Report Share Posted January 12, 2014 looking like youre making some progress keep with it bro 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.