basscherokee Posted July 30, 2012 Report Share Posted July 30, 2012 (edited) im going to be running an audioque 750 at 2 ohms but might bump up to 1 ohm soon. im ordering a new wiring kit and am torn between 0 and 4 gauge. any suggestions? btw im not going to add any more power (amps) for a while Edited July 30, 2012 by basscherokee Quote 2001 vw gti 2 hds212s 4.75 net tuned to 34hz audioque1200 wired to 1 ohm nvx 0 gauge to the back kinetic khc 2000 kenwood deck Link to comment Share on other sites More sharing options...
Guest Posted July 30, 2012 Report Share Posted July 30, 2012 since it uses 4 gauge. use 4 gauge. you're not gonna have enough power for the l7's though Quote Link to comment Share on other sites More sharing options...
SlamminBeats Posted July 30, 2012 Report Share Posted July 30, 2012 do 0 gauge, then at amp do 4 gauge. just in case you decide to upgrade. and you will decide to upgrade. Quote Link to comment Share on other sites More sharing options...
basscherokee Posted July 31, 2012 Author Report Share Posted July 31, 2012 since it uses 4 gauge. use 4 gauge. you're not gonna have enough power for the l7's though That's alright I'm only going to run one for now but I just wanted to know if it would run fine on 4 gauge Quote 2001 vw gti 2 hds212s 4.75 net tuned to 34hz audioque1200 wired to 1 ohm nvx 0 gauge to the back kinetic khc 2000 kenwood deck Link to comment Share on other sites More sharing options...
CleanSierra Posted July 31, 2012 Report Share Posted July 31, 2012 It will work just fine, however something does concern me. You said you may drop it down to 1 ohm. How do you intend to do that? Your sub will not wire to 1 ohm, you'll have to get a second to run a final load of 1 ohm. In that case, the 750 isn't gonna get it done. Quote Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
Bump4life Posted July 31, 2012 Report Share Posted July 31, 2012 that amp will never need more than 4 gauge wire. Quote Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
SlamminBeats Posted July 31, 2012 Report Share Posted July 31, 2012 since it uses 4 gauge. use 4 gauge. you're not gonna have enough power for the l7's though That's alright I'm only going to run one for now but I just wanted to know if it would run fine on 4 gauge run the 0 then disto it to 4 gauge at the amp. Quote Link to comment Share on other sites More sharing options...
2K XJ Posted July 31, 2012 Report Share Posted July 31, 2012 Run zero gauge to the back and hook it to a distro block and get a small length of 4 guage to the amp. Once you get to bumping that bass your going to realize that your speakers suck at keeping up with the bass and your probly gonna want to get a 4 channel to get them louder. I've been there and done that in my Cherokee. Just make sure to fuse your wires after the distro block. Quote 1999 Jeep Cherokee SportLifted on 31'sPopcorn Sounds AX6000.1 w/ AA 500.1 "THE F1X" board4 Obsidian Audio OA15's C pillar wall @ 29hz ^^^work in progress^^^ Link to comment Share on other sites More sharing options...
SlamminBeats Posted July 31, 2012 Report Share Posted July 31, 2012 ^ basically what i said Quote Link to comment Share on other sites More sharing options...
basscherokee Posted July 31, 2012 Author Report Share Posted July 31, 2012 It will work just fine, however something does concern me. You said you may drop it down to 1 ohm. How do you intend to do that? Your sub will not wire to 1 ohm, you'll have to get a second to run a final load of 1 ohm. In that case, the 750 isn't gonna get it done. i actually have a second sub and will run it at one (i know super under powered) but my next plans now will be to get a second 750.1 and strap them for 2 ohms on 2 new subwoofers in the future since it uses 4 gauge. use 4 gauge. you're not gonna have enough power for the l7's though That's alright I'm only going to run one for now but I just wanted to know if it would run fine on 4 gauge run the 0 then disto it to 4 gauge at the amp. just ordered 0 and im doing this thanks guys for the imput Quote 2001 vw gti 2 hds212s 4.75 net tuned to 34hz audioque1200 wired to 1 ohm nvx 0 gauge to the back kinetic khc 2000 kenwood deck Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.