ch0sen Posted August 10, 2012 Report Posted August 10, 2012 Can you take a picture of your engine bay for us? And some wire loom is good idea if you haven't yet Quote My current 95 Jetta Build w/ pioneer h/u 2 RD Sonance 10's with flatwind coils 2 Audiopipe apsm 1500.1s 1 Hifonics Brutus Elite 60x4 1 XS d925 1 Stinger spv35 1 1000 amp lead acid 50 ft of 0/1 ofc from Audiotechnix all powerbass components, and coaxils, 4 sets buildlog = http://www.stevemead...2-rd-10s-build/ My build for my wife. http://www.stevemead...01-f-150-build/
Guest Posted August 10, 2012 Report Posted August 10, 2012 I used the lug that was on the alternator. Just put a small washer between bolt and terminal. no. the thing with the hole thats attached to the wire in the picture. Quote
christamez80 Posted August 10, 2012 Author Report Posted August 10, 2012 I use a heavy duty crimper. I can take a pic tomorrow cause I'm not home right now but I did use wire loom. It melted it as well. Quote
Guest Posted August 10, 2012 Report Posted August 10, 2012 (edited) . Edited January 13, 2024 by Dtowndubzz Quote
christamez80 Posted August 10, 2012 Author Report Posted August 10, 2012 Just replaced it yesterday with a new piece and it did it again. Quote
Lbox88 Posted August 10, 2012 Report Posted August 10, 2012 (edited) how much power are you trying to run, and are any of the bolts/nuts/ring terminals loose when you went to take the wire off? EDIT: added your pics from above^^ Edited August 10, 2012 by Lbox88 Quote UBL | Build Log
Guest Posted August 10, 2012 Report Posted August 10, 2012 it has to be a connection issue. no way in hell is that from engine heat. picture of said crimper? Quote
ROLEXrifleman Posted August 10, 2012 Report Posted August 10, 2012 I may come off looking like real idiot or my eyes need to be checked, but doesnt the picture make it look a little like he has 2 batteries wired in series? Quote Rolex you sicken me. Just let me finish my pie ~ Juice
Guest Posted August 10, 2012 Report Posted August 10, 2012 no sir. he has it going alt to battery. then battery to amp fuse holder to amp. Quote
ROLEXrifleman Posted August 10, 2012 Report Posted August 10, 2012 I was over thinking it. Look where he attached teh fuse holder! 1st thing I saw was teh embossed fue on the plastic and thought it was a housing for a 2nd battery! Overcomplicating teh issue! My bad Quote Rolex you sicken me. Just let me finish my pie ~ Juice
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.