mrdavebasshead75 Posted August 24, 2012 Report Share Posted August 24, 2012 Just ordered one for my wifes car, yes I know... She gotta start somewhere. I need a basic ported box for it. Its a d4 and will be running off a Kicker ZX 500.1 @ 2ohms. Need around 0.75cubes @32 hz. Trunk dimensions are not needed being this is a small ass box as it is and its going in a 2003 Buick park avenue so she has plenty of room for it AND groceries! Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!! Link to comment Share on other sites More sharing options...
Joe X Posted August 24, 2012 Report Share Posted August 24, 2012 Just ordered one for my wifes car, yes I know... She gotta start somewhere. I need a basic ported box for it. Its a d4 and will be running off a Kicker ZX 500.1 @ 2ohms. Need around 0.75cubes @32 hz. Trunk dimensions are not needed being this is a small ass box as it is and its going in a 2003 Buick park avenue so she has plenty of room for it AND groceries! Here is a suggestion done on your specs: Enclosure Specifications: Fb = 32 Hz Vb = 0.75 ft^3 External Height = 9.5 in External Width = 21.25 in External Depth = 14 in Port Width = 1 1/2 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: Front = 19 x 8 Back = 21 1/4 x 8 Left & Right Sides: Side 1 = 12 1/2 x 8 Side 2 = 13 1/4 x 8 Top & Bottom = 21 1/4 x 14 L Port Internal Assembly Parts: Front to Back = 11 x 8 Extension = 16 x 8 Extension 2 = 6 1/4 x 8 Assembly guide (generic dimensions): Let me know any questions. Quote Link to comment Share on other sites More sharing options...
mrdavebasshead75 Posted August 24, 2012 Author Report Share Posted August 24, 2012 JoeX! Once again u came to the rescue. Ill have have to send u a donation for being so helpful. Shoot me a PM with your Paypal info and ill get it to ya! Quote http://www.stevemeadedesigns.com/board/topic/141026-2001-bravada-build-2-15supdated/?fromsearch=1 ----old build!! http://www.stevemeadedesigns.com/board/topic/194247-2005-chrysler-300c-buildslowwwww-lol/ -----new build!! Link to comment Share on other sites More sharing options...
john253a Posted August 24, 2012 Report Share Posted August 24, 2012 (edited) the pic is draw with a 1/2" base, so just change it to 3/4" (the person i drew it for had it in a tight area) Edited August 24, 2012 by john253a Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.