bumpincruiser Posted January 17, 2008 Report Posted January 17, 2008 ok so im half way to my new system and all i have left to get is the sub and make the box. now im just contemplating between these three subs. DC level 4, audioque hdc12, or an Fi Q all 12 inches. i have a kicker zx 1500.1 so they will get more than enough power, and i would like to run at 2 ohms. my question is what sub will give me the biggest bang for my buck. they are all in my price range. around 300. any input? also can the level 4 be run at 2 ohms because on their site it only had the D2 option, or do they have a D1 option thanks! Quote
andym85 Posted January 17, 2008 Report Posted January 17, 2008 honestly i dont really see how u can go wrong...seriously. flip a coin... and im sure DC could do some D1 or D4 coils to get you your 2ohm load... Quote i likes me some audio stuff...
bumpincruiser Posted January 17, 2008 Author Report Posted January 17, 2008 honestly i dont really see how u can go wrong...seriously. flip a coin...and im sure DC could do some D1 or D4 coils to get you your 2ohm load... so if i went with the DC where would i buy one.. i looked all around but could not find a place that sold one. the only thing i saw was to contact some guy on their website. is this the only option to get a new DC sub. also do the DC subs take more power than they are listed as. can i run a level 4 12 at like 1200-1300 rms no prob like an Fi Q? thanks for the feedback Quote
WCA Rusty Posted January 17, 2008 Report Posted January 17, 2008 Yup they will take 1200-1500 =] We could build you a LV4 with a LV5 D1 coil, Heres a link to a couple GotFI had built the same way and hes running 3K to the pair http://www.stevemeadedesigns.com/board/ind...showtopic=15339 In the contact section of the website theres a couple dealers you can order from or directly through me on the board if theres no dealer in your area. Quote DC AUDIO Phone Number 1(855)SPL-DBZZ Built by Competitors, for Competitors.
FYI-Future-Star Posted January 17, 2008 Report Posted January 17, 2008 go through Rusty i bought 2 LV5 18s from him great guy and great service Quote Team O.B.M '97 Tahoe Build after the new year!!! Kenwood kdc-x794/16gig android tablet 6 sets of Crescendo ccx65s 2 18s 2 Sundown saz 4500s 2 Sundown sax 100.4 1 Mechman SMD spec 360a 4 XS d1400s My Feed Back http://www.stevemead...showtopic=44841 ub
bumpincruiser Posted January 17, 2008 Author Report Posted January 17, 2008 go through Rusty i bought 2 LV5 18s from him great guy and great service so would a kicker zx1500 be enough to push that lvl 5 with lvl 5 coils D1 at 2 ohms?? Quote
Guest Nismofreak Posted January 17, 2008 Report Posted January 17, 2008 i run 1,600rms to my dc soon to be 2,000 to see if they will take Quote
99GPGTX Posted January 17, 2008 Report Posted January 17, 2008 will a lvl 5 take my autotek mm3k.1d???? Quote Currently: 2015 Evo X WW Forgestar F14 18s --Rally Armour Mudflaps ETS 3.5" FMIC, CAI, Open Dump DownPipe, Test Pipe, Ultimate Racing Catback, BLEVINS TUNE, Fortune Auto 500 Coilovers Build: Crescendo Mezzos x2 Crescendo 800.4, 1500.1 Loaded Fi Q12 Second Skin Pro XS D5100 RF 360.2 Sky High Audio Wiring Need: ALTERNATOR! PREVIOUS 1999 Grand Prix GTX 3.8L S/C-few modsWheels: Ruff Racing 280 19x8.5 Sub: Fully Loaded 12" Fi BTL Amps: Autotek MM3000.1d Sundown SAX-100.4HU/Tweets/mids: Alpine D310 + H701, TBI HDSS tweets, Mpyr audio 65m x4extra sheit: knukonceptz 0, 4, rcas, speaker wire EA 200amp alt HC 2400 TEAM DEADLY HERTZ!! Financial Consultant- Charles Schwab
bumpincruiser Posted January 17, 2008 Author Report Posted January 17, 2008 will a lvl 5 take my autotek mm3k.1d???? i mean will it be underpowered with my amp?? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.