Captain Stupid Posted October 18, 2012 Report Posted October 18, 2012 i wouldnt bother with it. a turbo or supercharger will do more for you and wont harm a stock engine a supercharger would make more sense. At least you have power across the board instead of taking a slow car (im not dissing, i have one lol) and mashing FULL THROTTLE on the gas and taching it out with all it has just to get a little bit of extra speed. You have to be WIDE OPEN to use NOS where a supercharger you are using it at all RPM's. I would like to SC my Tahoe but i don't think i can find a belt long enough since i am already on 4 alternators. Look into a Procharger Cog Drive setup. Costs a tad bit more than the standard setup, but has a cog pulley on the supercharger and a cog wheel that mounts in front of your serpentine wheel on the crank. Doesn't interfere with your serpentine system. Although the Procharger unit may have fitment space issues with so many alts on here. I'd call them and ask. Could be worth doing. Just about $6k for another 200-ish horsepower and torque throughout the power band. 2006 Cadillac Escalade 2/3 drop on 28" wheels Two RE SX 18" subs RF T2500-1bdCP amp, 3531watts on birthsheet Custom carbon fiber sub box EVERYTHING else is stock, for now 149.4 @ 37hz, Termlab, dash, open window on two AQ3 18s all stock electrical, wired to .25 ohm on a RF T2500 148.8 @ 36hz, Termlab, dash, open window on one AQ3 18 all stock electrical, wired to .5 ohm on a RF T2500 147.8 @ 38hz, Termlab, legal, sealed on two RE SX 18s 146.4 @ 36hz, Termlab, legal, sealed on one RE SX 18 Link to my hack-built, stupid, carbon fiber wasting project.... http://www.stevemeadedesigns.com/board/topic/149946-carbon-fiber-box-update-1494db-37hz-on-tl/ http://gifsoup.com/NDM3MTc1MQ
Miguels Posted October 18, 2012 Report Posted October 18, 2012 thanks bro. I am not gonna tell you what to do but take it from someone that currently has a throttle body spacer. Don't waste your money. It just makes noise. I would take mine off if i still had the right sized bolts to do so. The long ones that accomodate the TBS are too long if its removed. I don't know where my stock ones are. I am used to the whistle but trust me, thats all that thing ever did was make noise and not any extra power. i work for a fastener company.. shoot me the size you need and can ship them to you my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Guest Posted October 18, 2012 Report Posted October 18, 2012 put your honest opinion you think it would handle a 50? Just for some fun, with all those miles on it.
Miguels Posted October 18, 2012 Report Posted October 18, 2012 eh just for sh**s and giggles, im gonna put a new intake, throttle body spacer, chip, and a few other things, was just wondering. I know i wont feel it, but then again im sure ide be the only one with a bottle on a tahoe. . love your stuff btw meade make sure you have forged pistons though.. ive seen many cars blow an engine because of the movie fast and furious.. friends when out buying nos and blow engine on first race my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Guest Posted October 18, 2012 Report Posted October 18, 2012 eh just for sh**s and giggles, im gonna put a new intake, throttle body spacer, chip, and a few other things, was just wondering. I know i wont feel it, but then again im sure ide be the only one with a bottle on a tahoe. . love your stuff btw meade make sure you have forged pistons though.. ive seen many cars blow an engine because of the movie fast and furious.. friends when out buying nos and blow engine on first race yea ofc haha, otherwise youll leave them laying in the street.
Miguels Posted October 18, 2012 Report Posted October 18, 2012 eh just for sh**s and giggles, im gonna put a new intake, throttle body spacer, chip, and a few other things, was just wondering. I know i wont feel it, but then again im sure ide be the only one with a bottle on a tahoe. . love your stuff btw meade make sure you have forged pistons though.. ive seen many cars blow an engine because of the movie fast and furious.. friends when out buying nos and blow engine on first race yea ofc haha, otherwise youll leave them laying in the street. i doubt you would have them though. usually camaros have them.. like the 302 (5.0) mustang had them but the explorer didnt. same engine different internals my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Leo1103 Posted October 18, 2012 Report Posted October 18, 2012 there used to be a guy on the forum, he had a tahoe with around 750 hp on pump gas haven't seen him in a while though here's his thread http://www.stevemeadedesigns.com/board/topic/114036-project-tahoe-hp/ 2002 Honda CR-VAlpine 9887My BuildRebuilding... Second Skin Damp 4 DC XL 15's 2 DC 5ks Singer 320 amp 6 cap banksSky High wire 2 VM-1's OM-1 all under window line Team DC Audio Obama has a law he's trying to pass right now, trying to ban Leo for being a threat to children everywhere.EDIT: Not in a JP kind of way. I thought I was going to die from all the jizz filling my ears.
Guest Posted October 18, 2012 Report Posted October 18, 2012 im probably gonna heat wrap the headers this weekend, see how that goes, results will be on my build log
Captain Stupid Posted October 18, 2012 Report Posted October 18, 2012 All late model GM engines come with hypereutectic pistons, which are capable of handling at least a 150 shot easy. It's the tuning and throttle that will destroy your engine if you aren't careful. Think of nitrous like amplifier power. Your engine can handle x number of watts (nitrous), but if it gets too lean, that is like clipping. And the worse the clipping, the faster and more severely you'll do damage. Get your nitrous lean and you could do serious damage to your engine the first time you hit the button, even with a 50-shot. You'll also want to make absolutely certain your fuel system is up to snuff to pushing more fuel. I'd say put in a brand new inline fuel filter while you're at it. also, make absolutely certain your throttle activation switch is set properly to only engage the nitrous under full throttle and turns off immediately when the gas pedal is released even slightly. what happens when you let go of the gas pedal and the nitrous is still activated? KABOOM! Carnage. I once ran a race motor with nothing but the push button for activation. No throttle activation switch. Worked just fine on a 250 shot until I spun my tires off the line once and pedaled the throttle. Wasn't enough to kaboom, but it did put holes in two pistons and break some ringlands. .....Yes, forged pistons. 2006 Cadillac Escalade 2/3 drop on 28" wheels Two RE SX 18" subs RF T2500-1bdCP amp, 3531watts on birthsheet Custom carbon fiber sub box EVERYTHING else is stock, for now 149.4 @ 37hz, Termlab, dash, open window on two AQ3 18s all stock electrical, wired to .25 ohm on a RF T2500 148.8 @ 36hz, Termlab, dash, open window on one AQ3 18 all stock electrical, wired to .5 ohm on a RF T2500 147.8 @ 38hz, Termlab, legal, sealed on two RE SX 18s 146.4 @ 36hz, Termlab, legal, sealed on one RE SX 18 Link to my hack-built, stupid, carbon fiber wasting project.... http://www.stevemeadedesigns.com/board/topic/149946-carbon-fiber-box-update-1494db-37hz-on-tl/ http://gifsoup.com/NDM3MTc1MQ
Guest Posted October 18, 2012 Report Posted October 18, 2012 I'm gonna start with the pain in the A** of heat wrapping my headers and getting that over with. This weekend.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.