Jump to content

00 dakota rebuild started! wall is out! update on page 6


Recommended Posts

Posted

had n8 unlock this now that im done with the wall. now that im going back to school and have a little more time to do stuff i can start working on my doors/center console!

but first here are all the pics i have of the wall currently (if you wanna see the build up you will have to watch the youtube videos sorry no pics!)

subs and amp

20130322_175359.jpg

(seats are not bolted down just finished the first coat of paint )

20130322_1749150.jpg

subs in

phpb7VIWOPM.jpg

and this is what ill be working on all weekend my cheapo parts-express doors!

4 6.5s and 2 super tweeters in each door (dont mind the cheesy paint skillz thats 1 of 3 ideas i have for location)

20130410_171309-1.jpg

will start the center console next week monday most likely (its just gonna be a simple SMALL design and will not have speakers, amps or switches in it. possibly a back up camera monitor and some lights)

down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups

^^ Cant wait to swalllow Ghost's babies

Posted

it doesnt look very loud

It isnt.. cant even hairtrick with a windown down.......

Your avatar doesnt have enough cleavage

down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups

^^ Cant wait to swalllow Ghost's babies

Posted

and this is what ill be working on all weekend my cheapo parts-express doors!

4 6.5s and 2 super tweeters in each door (dont mind the cheesy paint skillz thats 1 of 3 ideas i have for location)

20130410_171309-1.jpg

the speakers are gonna fit almost side to side if youre using 6.5s and watch our for the spacing between the panel and doors. its a bit tight.

Posted

and this is what ill be working on all weekend my cheapo parts-express doors!

4 6.5s and 2 super tweeters in each door (dont mind the cheesy paint skillz thats 1 of 3 ideas i have for location)

20130410_171309-1.jpg

the speakers are gonna fit almost side to side if youre using 6.5s and watch our for the spacing between the panel and doors. its a bit tight.

yeah i wanted to do 4 8s but couldnt figure out good placement, i think i will be able to space them by atleast .5 inch apart

and yeah the whole middle of the door will be cut out and replaced with a MDF back/skeleton to reinforce the panel a bit but i will be doing a few dozen test fits before i start glassing lol

down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups

^^ Cant wait to swalllow Ghost's babies

Posted

The wall is looking great! That splatter paint in the port looks pretty sick.

2002 Dodge Dakota 4.7 club cab - Sold 2004 Audi S4 Avant

- Fi and Crescendo - Stock Bose System

- http://www.stevemeadedesigns.com/board/topic/147725-2002-dodge-dakota-end-of-the-road/?hl=%202002%20%20dakota

136.4 Sealed @ 29hz

137.0 Drivers window open @ 26hz

Posted

The wall is looking great! That splatter paint in the port looks pretty sick.

jon (skyhigh) inspired me to do it i still have like 1/3 of black and 1/3 of green yet but i think im gonna use it for my center console and match it with with port (green base coat,black spatter)

just checked tracking and the alt will be here FRIDAY along with the parts express 6.5s and super tweeters... i gotta get to work! lol

down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups

^^ Cant wait to swalllow Ghost's babies

  • 1 month later...
Posted

wall is 90% out

saz3500d is gone

2 of the 15s where traded for a AQ HDC4 18s locally (never used he bought it and never had the money to power it lol)

2 of the 15s are still pending sale/trade (tonasty should be buying them)

im keeping the 5 deka group 34s for this build but will be adding 2 more in the back

single 280a sessive amperage alt for now (my AC compressor is on its last leg so once it dies ill be putting the stock one in till i buy another EA alt)

adding 2 more positive runs to the back

grounding some more to the frame

2 4kw's (second one is being shipped friday)

2 HDC4 18s

planning for no wall but things might change (my gf wont drive my truck with a wall lol)

will be doing a center console build (nothing fancy just some temp gauges voltage gauges and a few switches and possibly a tablet)

dont mind the toes :D

IMG_20130521_184631.jpg

ETA of completion is end of june!

ill be trying to update as much as possible but like always my videos will go up before pics so check out the youtube channel for faster updates

down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups

^^ Cant wait to swalllow Ghost's babies

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1380 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...