kickass audio Posted December 14, 2012 Report Share Posted December 14, 2012 okay man. it will still crash for sure but if i can find out what is causing it to crash i can probably help you fix it. One thing i want to know before we do any troubleshooting after finding the bsod code is if you have an external hard drive or anything to back your stuff up to just incase we need to reinstall windows. It more than likely will not come down to that but its a computer and anything is fair game with them lol. Trust me, ive been working on them for over 12 years and learned so much about the way they work and what can/will go wrong and its best to have your shit backed up before you fiddle with it as i have lost my stuff from not doing so. lol. 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
beaker Posted December 14, 2012 Report Share Posted December 14, 2012 You can also right click on my computer and go to manage. Look on the left under event viewer and hit the arrow to expand the tree. Go to Windows Logs->System If your hard drive is going bad you'll see a bunch of errors in there with a sourceid of disk You should also see the bluescreen event in there too, though I forget what the event name is, it will have a big red ! though. Link to comment Share on other sites More sharing options...
tacomabanga1986 Posted December 14, 2012 Author Report Share Posted December 14, 2012 umm, at start up i got a black screan with white text saying my external is bad, i got 2 externals tho, 1 empty, and 1 with about 200gb on it here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp here's a link to my other system my 90 geo prizm test car heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit Link to comment Share on other sites More sharing options...
kickass audio Posted December 14, 2012 Report Share Posted December 14, 2012 disconnect your external hard drives and other external media and reboot. it sounds like it is trying to boot from an external source before it looks at the hard drive. 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
beaker Posted December 14, 2012 Report Share Posted December 14, 2012 Uhm, whats the EXACT message that its saying. I've never seen any bios throw an error for an external USB drive saying is BAD. Unless its trying to boot to it like kickass is saying, but even then it wouldnt say the drive is bad . . .. Link to comment Share on other sites More sharing options...
tacomabanga1986 Posted December 14, 2012 Author Report Share Posted December 14, 2012 i found 1 red ! saying "the following boot start or system start driver(s) failed to load i8042prt only thing the ! says is the system shutdown @ so n so was unexpected, nothing more here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp here's a link to my other system my 90 geo prizm test car heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit Link to comment Share on other sites More sharing options...
kickass audio Posted December 14, 2012 Report Share Posted December 14, 2012 when you followed my directions you didnt change anything else around? That message i have never heard of and it doesnt sound like a message windodws will throw. Do you see the little vista logo where the green bar loads across the screen then the error pops up? 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
tacomabanga1986 Posted December 14, 2012 Author Report Share Posted December 14, 2012 i scrolled down the events and got a event id 4375, about 300 of em saying, windows servicing failed to complete the process of setting package kb2443685 update into staged state here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp here's a link to my other system my 90 geo prizm test car heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit Link to comment Share on other sites More sharing options...
tacomabanga1986 Posted December 14, 2012 Author Report Share Posted December 14, 2012 when you followed my directions you didnt change anything else around? That message i have never heard of and it doesnt sound like a message windodws will throw. Do you see the little vista logo where the green bar loads across the screen then the error pops up? no green vista bar, just full blue screan, and it restarts here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp here's a link to my other system my 90 geo prizm test car heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit Link to comment Share on other sites More sharing options...
beaker Posted December 14, 2012 Report Share Posted December 14, 2012 Check to make sure the time and date is correct Run windows updates profit. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.