Jump to content
DC Sound Lab

Perfect Box for 2 DC Level 4 15"S ?


Recommended Posts

Ok, so I have 2 kicker cvx 15's that I will replace with 2 dc level 4 15's in the near future, a few months or so. Anyways, I want to design the box around the dc's, and was wondering if this box I made would be perfect, they recommend 3.25 cubic ft per sub, but is going higher then that better, like to 4-5 cubic ft per sub, or do they work best in what dc recommended? here is the box I designed, I may invert the subs and get add .42 cubic ft to the box, so it would be around 6.9 cubes

IMAG0161.jpg

box.png

I am going to adjust the port volume to a bit higher, otherwise is this box perfect for those dc's? I have limited space to work with here so, thanks for your help

Edited by dereileak

2006 Mazda3 Hatchback Black 5 Spd Manual
Pioneer 4300DVD
2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)
Kicker 10ZX2500.1 (2845 RMS) Sub Amp
Kicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)
Kicker KQ3 Active Crossover
Kicker KQ30 Equalizer
Kicker 09QS60.2 Components (Woven Carbon Cones)
Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)
2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -)

1/0 Gauge KNU Kollasal Flex (1 Run for -)

300 Ft Kicker X-Series 16 Gauge Speaker Wire
XS Power D3400 (Rear)
XS Power D3100 (Front)
Singer Externally Regulated Alternator (Being Built)

+ The Love for Car Audio and BASS <3

UBL Build Log <------- Click Here-------> Normal Build Log (For Comments)

Link to comment
Share on other sites

ok designed a new box with great specs, let me know what you think, I have to measure to make sure the port depth will fit in the hatch, if its too deep I will make the port like 4-3.5 inches deep and widen the port to 24 inches or so :D

I was recommeded by cj18 to do 30 hz tuning, 14 sq inches per cubic ft, and 3.5 cubic ft per sub, for 7 cubic ft total, here is what I made

IMAG0237.jpg

calc.png

Edited by dereileak

2006 Mazda3 Hatchback Black 5 Spd Manual
Pioneer 4300DVD
2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)
Kicker 10ZX2500.1 (2845 RMS) Sub Amp
Kicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)
Kicker KQ3 Active Crossover
Kicker KQ30 Equalizer
Kicker 09QS60.2 Components (Woven Carbon Cones)
Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)
2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -)

1/0 Gauge KNU Kollasal Flex (1 Run for -)

300 Ft Kicker X-Series 16 Gauge Speaker Wire
XS Power D3400 (Rear)
XS Power D3100 (Front)
Singer Externally Regulated Alternator (Being Built)

+ The Love for Car Audio and BASS <3

UBL Build Log <------- Click Here-------> Normal Build Log (For Comments)

Link to comment
Share on other sites

  • 2 weeks later...

DC recommends things for a reason, just do it. Bigger box = less power handling.

yea true, I actually ordered 2 sundown sa-12's, I have a thread in the sundown section with a box for it, that im building in a couple hours

2006 Mazda3 Hatchback Black 5 Spd Manual
Pioneer 4300DVD
2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)
Kicker 10ZX2500.1 (2845 RMS) Sub Amp
Kicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)
Kicker KQ3 Active Crossover
Kicker KQ30 Equalizer
Kicker 09QS60.2 Components (Woven Carbon Cones)
Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)
2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -)

1/0 Gauge KNU Kollasal Flex (1 Run for -)

300 Ft Kicker X-Series 16 Gauge Speaker Wire
XS Power D3400 (Rear)
XS Power D3100 (Front)
Singer Externally Regulated Alternator (Being Built)

+ The Love for Car Audio and BASS <3

UBL Build Log <------- Click Here-------> Normal Build Log (For Comments)

Link to comment
Share on other sites

i used 2 level 4 15s, put them in recommended and you will be fine and be able to feed them more than rated power.

i would put them in 6-7 cubes, tuned around 32-35hz.

29408240963_9908a51930_o.png
Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's]

BL :  http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/
YouTube: http://www.youtube.com/hitemwiththeflex/

Link to comment
Share on other sites

  • 2 weeks later...

DC recommends things for a reason, just do it. Bigger box = less power handling.

yea true, I actually ordered 2 sundown sa-12's, I have a thread in the sundown section with a box for it, that im building in a couple hours

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

i used 2 level 4 15s, put them in recommended and you will be fine and be able to feed them more than rated power.

i would put them in 6-7 cubes, tuned around 32-35hz.

2006 Mazda3 Hatchback Black 5 Spd Manual
Pioneer 4300DVD
2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)
Kicker 10ZX2500.1 (2845 RMS) Sub Amp
Kicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)
Kicker KQ3 Active Crossover
Kicker KQ30 Equalizer
Kicker 09QS60.2 Components (Woven Carbon Cones)
Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)
2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -)

1/0 Gauge KNU Kollasal Flex (1 Run for -)

300 Ft Kicker X-Series 16 Gauge Speaker Wire
XS Power D3400 (Rear)
XS Power D3100 (Front)
Singer Externally Regulated Alternator (Being Built)

+ The Love for Car Audio and BASS <3

UBL Build Log <------- Click Here-------> Normal Build Log (For Comments)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 615 Guests (See full list)

×
×
  • Create New...