skaraudio Posted August 15, 2014 Report Posted August 15, 2014 If setup properly and with the correct amount of electrical the SK-4500.1D can usually be ran without a hitch at 0.5 ohm just like any of the other SK mono blocks.. That being said however - we cannot warranty them at that load because this unfortunately is not a perfect world and running below 1 ohm opens the door to many issues outside of our control if not properly installed. You will be quite happy with any SK Series amplifier you choose though =) the line has been around for years and very few changes have been made because of it's true and tested end user results. - Kevin Skar Audio www.SkarAudio.comPhone : (888) 501-7527
robsmokingood Posted September 10, 2014 Report Posted September 10, 2014 .33 daily on my sk 4500 Just need the proper electrical before touching that low last build was my malibu walled on a single skar 4500 @.33 daily 6 deka g31 batts Singer 330a alt 4 runs of 3/0 front-back Three hdc3 15 Did a 154.6 this summer at Grassroots Building a 99 yukon denali atm ? 18 from canada ontario
Recommended Posts