Pioneerchuck Posted January 4, 2013 Report Share Posted January 4, 2013 Dude, just take a tape measure to the trunk and get a depth measurement (from front to far back of trunk), a width measurement (from side to side), and a height measurement (from bottom of trunk to top most part of trunk where box wont interfere with anything). Once you get those measurements post em up and someone can get you a pretty good design made up. But make sure you're measurements don't interfere with the trunk mechanisms or make to where you have to do intricate designs. I don't think you're ready for that just yet. Link to comment Share on other sites More sharing options...
Cox Posted January 5, 2013 Report Share Posted January 5, 2013 From what I understand you don't plan on building this in your trunk so you need to figure out how much room you have to still be able to slide the box in the trunk. Those are the dimensions we need. Not your trunk dimensions. Also, you can figure that out by making a cardboard model. Kenwood Excelon x396AQ2200Fi Q 12XS D3400 XS XP30001/0 RADAFLEXStinger volt meter Mechman 240a alt Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.