Carbon Posted February 12, 2013 Author Report Share Posted February 12, 2013 08 Civic Mugen Si Link to comment Share on other sites More sharing options...
purplesyrup Posted February 12, 2013 Report Share Posted February 12, 2013 if you have figured out what your going to run, start planning for wiring before you get to far along and have to back track Link to comment Share on other sites More sharing options...
Carbon Posted February 12, 2013 Author Report Share Posted February 12, 2013 if you have figured out what your going to run, start planning for wiring before you get to far along and have to back track Right now I have 2 Fi DDS 18s Fully loaded, 2 xs power D3400s, As soon as I have some more cash Ill be getting alot more gear. DC 10.0k hopefully. Link to comment Share on other sites More sharing options...
scooter99 Posted February 12, 2013 Report Share Posted February 12, 2013 Well you can always run power under the car in carlon flex tubing or pvc. That would eliminate that. The rest is basically RCA's and speaker wires. Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
Carbon Posted February 12, 2013 Author Report Share Posted February 12, 2013 I will be doing 2 runs of knu 0 OFC at most. Got a sneak peak from sky high though so things might change Link to comment Share on other sites More sharing options...
alaskanzx5 Posted February 13, 2013 Report Share Posted February 13, 2013 get a floor built in there. ned a flat surface to start with. build the amp rack and battery trays then build a wall to block off the opening to the trunk from the cabin and that would be part of the back wall of the box. run all the wiring under the box and the speaker wires straight through the back wall of the sub enclosure. can use weatherstriping on the side of the box where the doors are so that when you close the door it pushes on the weather stripping sealing it off. oh and why is this not done and where is the link to the build log? t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Carbon Posted February 13, 2013 Author Report Share Posted February 13, 2013 No build log for a few reasons, I'm not running any nice gear at the moment, the gear I do have coming in is getting delayed shipping. I hate slow builds lol Do not worry, when I get the cash in I will start a build log. Honestly I think this might be the first walled Mugen si in the world... Link to comment Share on other sites More sharing options...
scooter99 Posted February 13, 2013 Report Share Posted February 13, 2013 You're probably right cause most of the douchebag 8th owners despise this kind of thing. But I'm pullin for ya buddy! Wish I could do it to mine! I'd love a couple 18's behind my head! Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.