AZaudio Posted February 5, 2013 Report Posted February 5, 2013 One of the leads to a 3" rainbow speaker (part of the SLC 365 Comp set) ripped out of the inside of the cone to where I'll probably have to cut into it. Should I just run the 6.5's and the tweets or would it be worth replacing? [*]DC Neo 15" [*]Digital Designs M3a [*]Audioque Super Tweets [*]SoundQubed 6.5" Mids [*]All Knukonceptz 1/0 w/ Big 3 [*]XS Power D6500 [*]Pioneer DEH-80PRS
AZaudio Posted February 5, 2013 Author Report Posted February 5, 2013 [*]DC Neo 15" [*]Digital Designs M3a [*]Audioque Super Tweets [*]SoundQubed 6.5" Mids [*]All Knukonceptz 1/0 w/ Big 3 [*]XS Power D6500 [*]Pioneer DEH-80PRS
HunterJohnson Posted February 5, 2013 Report Posted February 5, 2013 if you think you can fix it try that. or else I'd replace it because 3 way is going to fill in the 6.5-tweeter gap Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
Trey_Dog650 Posted February 5, 2013 Report Posted February 5, 2013 Rainbow sounds expensive. Hell yeah I'd try and fix it lol 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head.
AZaudio Posted February 5, 2013 Author Report Posted February 5, 2013 Well any suggestions on where to open her up at? [*]DC Neo 15" [*]Digital Designs M3a [*]Audioque Super Tweets [*]SoundQubed 6.5" Mids [*]All Knukonceptz 1/0 w/ Big 3 [*]XS Power D6500 [*]Pioneer DEH-80PRS
HunterJohnson Posted February 6, 2013 Report Posted February 6, 2013 take a picture of the front. Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
AZaudio Posted February 6, 2013 Author Report Posted February 6, 2013 [*]DC Neo 15" [*]Digital Designs M3a [*]Audioque Super Tweets [*]SoundQubed 6.5" Mids [*]All Knukonceptz 1/0 w/ Big 3 [*]XS Power D6500 [*]Pioneer DEH-80PRS
HunterJohnson Posted February 6, 2013 Report Posted February 6, 2013 I'd cut off the dust cap with an exacto knife. be careful so you can glue it back on Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
tacomabanga1986 Posted February 6, 2013 Report Posted February 6, 2013 I'd cut off the dust cap with an exacto knife. be careful so you can glue it back on i was thinking the same thing, but would ca diactivator help loosin the glue around the dust cap a little easier to get exacto knife under the lip of the dustcap or will it harm the cone? here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp here's a link to my other system my 90 geo prizm test car heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit
Skullz Posted February 6, 2013 Report Posted February 6, 2013 Most likely you won't be able to repair that as they tend to fill the whole area with superglue so nothing comes loose and separates. 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2
Recommended Posts
Archived
This topic is now archived and is closed to further replies.