Jump to content

Recommended Posts

Well here is the latest... (Pics moved to the top)

The box have both voice coils wired to the outside to changes the ohm load with out removing the subs

Looking to build an amp rack to hold both the RF and SQ amps and also hide the wiring.

Need to pull the box back out and glass the inside due to having a few air leaks...

Still have a few touches to do on the doors but for the most part they are done...

Still need to work on the power system... Looking to upgrade the stock alt with a 240amp and also put a second battery in the back... I have installed 1/0 from the batt to the alt and ground... Not shown in the pics but the amp has been hooked up and basic tuning has been done... It is LOUD and once the air leaks are fixed am sure I can do some minor pressure tricks...

 

2010 Chevy  HHR Panel (Work in progress)

Pioneer AVHX-5800BHS

McLaren MLM880's and MLT2's 2ea per door on a DC 175.4

Two DC Audio M4 Level 5 15's On A DC5K

Alt CES 200/270+

4ea Banks of Maxwell 2.7v 3000f caps for a total of 2000f

1ea XS 3100 and 2ea NSB FT170 Batts for 450+ah 

Not a HUGE build but here it is... DC Audio HHR Build

 
TDH-skater229.jpg
SkaterLogo.jpg
 
Link to comment
Share on other sites

Just a small video... Still need to do some work but coming along rather well...

Again not much but a start... Thanks for looking...

 

2010 Chevy  HHR Panel (Work in progress)

Pioneer AVHX-5800BHS

McLaren MLM880's and MLT2's 2ea per door on a DC 175.4

Two DC Audio M4 Level 5 15's On A DC5K

Alt CES 200/270+

4ea Banks of Maxwell 2.7v 3000f caps for a total of 2000f

1ea XS 3100 and 2ea NSB FT170 Batts for 450+ah 

Not a HUGE build but here it is... DC Audio HHR Build

 
TDH-skater229.jpg
SkaterLogo.jpg
 
Link to comment
Share on other sites

  • 1 month later...

Well the DC's made it here in record time... It is almost like they were flown in by charter... Anyways they made it from drop off on the 24th to my hands here on the base on the 27th... Still trying to figure that one out...

The sundowns have been pulled from the box and the DC Level 3's have been put in their place... Here is a side by side view of the old (left) and the new (right)...

Sundown-DC.jpg

Will get pics of them in the box and also some video of them playing...

Now I need to work on the electrical side of the house... I have 1/0 cable to install from front to rear but just waiting on some fuse blocks and fuses I bought to come in... The next thing on the hit list to buy is an alt seeing that I was dipping volts and don't want to over tax my stock system too much...

Want to say many thanks to the DC Folks for getting the subs to me really quick... I was thinking they were going to be a another few weeks before I got them in my hands... And you caught me slipping cause I was planning on getting more things ready...

 

2010 Chevy  HHR Panel (Work in progress)

Pioneer AVHX-5800BHS

McLaren MLM880's and MLT2's 2ea per door on a DC 175.4

Two DC Audio M4 Level 5 15's On A DC5K

Alt CES 200/270+

4ea Banks of Maxwell 2.7v 3000f caps for a total of 2000f

1ea XS 3100 and 2ea NSB FT170 Batts for 450+ah 

Not a HUGE build but here it is... DC Audio HHR Build

 
TDH-skater229.jpg
SkaterLogo.jpg
 
Link to comment
Share on other sites

  • 3 weeks later...

Nice work

Thanks, It is not much but it does turn a few heads... I have a few more things to finish up and once done I should gain a little more out of the system...

 

2010 Chevy  HHR Panel (Work in progress)

Pioneer AVHX-5800BHS

McLaren MLM880's and MLT2's 2ea per door on a DC 175.4

Two DC Audio M4 Level 5 15's On A DC5K

Alt CES 200/270+

4ea Banks of Maxwell 2.7v 3000f caps for a total of 2000f

1ea XS 3100 and 2ea NSB FT170 Batts for 450+ah 

Not a HUGE build but here it is... DC Audio HHR Build

 
TDH-skater229.jpg
SkaterLogo.jpg
 
Link to comment
Share on other sites

  • 3 weeks later...
  • 4 weeks later...

Did an update today, bolted rails to the bed and then secured the box to them and also inverted the subs... Wiring is still a mess but battery box/amp rack with be built in front of the box on the remaining part of the rails... Also waiting on battery terminals to get here to do the batt install...

 

2010 Chevy  HHR Panel (Work in progress)

Pioneer AVHX-5800BHS

McLaren MLM880's and MLT2's 2ea per door on a DC 175.4

Two DC Audio M4 Level 5 15's On A DC5K

Alt CES 200/270+

4ea Banks of Maxwell 2.7v 3000f caps for a total of 2000f

1ea XS 3100 and 2ea NSB FT170 Batts for 450+ah 

Not a HUGE build but here it is... DC Audio HHR Build

 
TDH-skater229.jpg
SkaterLogo.jpg
 
Link to comment
Share on other sites

  • 10 months later...

Just installed a Toolmaker 2/0 fuse block and adapters... Still have a little wire clean up to do... Oh and the pic is not the best but was taken right after working on it at night...

NewFuseBlock.jpg

 

2010 Chevy  HHR Panel (Work in progress)

Pioneer AVHX-5800BHS

McLaren MLM880's and MLT2's 2ea per door on a DC 175.4

Two DC Audio M4 Level 5 15's On A DC5K

Alt CES 200/270+

4ea Banks of Maxwell 2.7v 3000f caps for a total of 2000f

1ea XS 3100 and 2ea NSB FT170 Batts for 450+ah 

Not a HUGE build but here it is... DC Audio HHR Build

 
TDH-skater229.jpg
SkaterLogo.jpg
 
Link to comment
Share on other sites

Looks awesome.

750??! Yeah, fuck that. Fuck this website, fuck SMD, fuck Steve, fuck all of his butt buddy mods, and their couches.

^ DON'T BE A DICK LIKE THIS GUY :)

Team Subsonic Lows

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...