JG4565 Posted February 17, 2013 Report Posted February 17, 2013 I have 2 sets of Rockford fosgate 6.5"s speakers and they're 75 rms a piece. And I have the Rockford 6x9's and they're 100 rms. I'm trying to power all these with the fosgate t600-4 amp. Could this be done?
bcbrassard Posted February 17, 2013 Report Posted February 17, 2013 Yes, wire the two pairs of 6.5s together on the front channle of the amp and that will bring them ohm load down to 2 ohm which that amp ia stable for and the 6x9s to the rear channel of the amp. What series are the RF speakers and does that amps RMS exceed what the speakers can handle? but It should be able to be done. someone with more knowledge can chime in.
JG4565 Posted February 17, 2013 Author Report Posted February 17, 2013 All those speakers are the power series.
Sonic Posted February 17, 2013 Report Posted February 17, 2013 Power wise it would be fine and can be hooked up as bcbrassard described. What model power series?
Alvi45 Posted February 17, 2013 Report Posted February 17, 2013 U should be fine at 2ohm that amp is 150rms x4 and 100rms X 4 @4 ohm
JG4565 Posted February 17, 2013 Author Report Posted February 17, 2013 The 6x9s are the the t1693 power series and the 6.5's are the t165 power series
Nyaim Posted February 17, 2013 Report Posted February 17, 2013 your good to go man (y) Pioneer AVH3200 DVD2, Pioneer 6.5" 2 way 60 Rms Kevlar4, Pioneer 6x9 2 way 80 Rms Kevlar1, Kicker Solo-Baric L7 15-Inch 1000 Rms1, 1000Rms Hifonics Monoblock Amplifier1, 800Rms Hifonics 4-Chan AmplifierAudio Control EpicenterKicker Kx3 Crossover120AH Power cell Battery (Main)Pioneer AVH4300 DVD HU2, 500rms D.A.S 10B 10' Mids 2, 500rms D.A.S 8' Mids2, 300Rms Pyramid TW47 2" Super Tweeter2, SA-12 D4 Tuned @ 33hz @ 4.26 ft^31, 1000Rms Rockford Fosgate T1000bdCP Amplifier - Birth sheet 1576Rms1, 1000Rms Rockford Fosgate T1000-4AD Amplifier - Birth Sheet 1496RmsAudio Control EpicenterAudio Control ESP2Clarion Mcd360 Electronic CrossoverKicker KQ30 30-Band EqualizerRockford Fosgate Rfc10hb 10 Farad Hybrid Digital CapacitorYellow Top Optima (Main) Big 3
Watch the bass Posted February 17, 2013 Report Posted February 17, 2013 U should be fine at 2ohm that amp is 150rms x4 and 100rms X 4 @4 ohm Boa a 8 channel RF amp! "in the abundance of water, the fool is thirsty" Bob Marley
Sonic Posted February 17, 2013 Report Posted February 17, 2013 The 6x9s are the the t1693 power series and the 6.5's are the t165 power series Ok, all is good !
bcbrassard Posted February 17, 2013 Report Posted February 17, 2013 so the front speakers will get there 75 RMS ratings and the back will see there RMS rating too. I would imagine there all the T1 series? whats there locations your going to be installing them at. I hope the 6x9 s are the T1692s.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.