BassMunky Posted April 21, 2013 Report Posted April 21, 2013 what size bolt fits through a 1/0 lug and a 4 gauge lug thanks Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
BassMunky Posted April 21, 2013 Author Report Posted April 21, 2013 nobody Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
01 S-10 Posted April 21, 2013 Report Posted April 21, 2013 They have different sizes, 5/16 and 3/8 is most common 5/16 is probably the most common TDH FTW !!!
pa-pa-platypus Posted April 21, 2013 Report Posted April 21, 2013 depends on the size of hole in said lug lol This isn't teeball. YOU DO NOT GET A TROPHY JUST BECAUSE YOU SHOW UP. Put the work in and then maybe get the respect when it has been earned 151.6 with single 12 at 41 hz 153.2 with 2 12's at 43 hz power: dd m4
BassMunky Posted April 21, 2013 Author Report Posted April 21, 2013 well what the common size for the 4 gauge? I know the 1/0 gauge is the reg size one and not the smaller hole. will the 3/8 fit through the 3/8 hole without any problems? Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
01 S-10 Posted April 21, 2013 Report Posted April 21, 2013 Of course a 3/8 bolt will fit in a 3/8 hole lol... 4 gauge lugs have the same size holes as 1/0 TDH FTW !!!
BassMunky Posted April 21, 2013 Author Report Posted April 21, 2013 k thanks for clearing that up. I was thinking that maybe the holes are too small Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
Trey_Dog650 Posted April 21, 2013 Report Posted April 21, 2013 Even if they are I'm sure you could drill and make the hole a little bigger 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head.
Jessica Posted April 21, 2013 Report Posted April 21, 2013 you can buy 3/8 and use a flat washer if it's too big. I would rather do that than try to drill through a 1/16" thick piece of copper. Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
01 S-10 Posted April 21, 2013 Report Posted April 21, 2013 you can buy 3/8 and use a flat washer if it's too big. I would rather do that than try to drill through a 1/16" thick piece of copper. I've had to do it before in a pinch, a unibit goes through relatively easy TDH FTW !!!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.