nolij1 Posted June 24, 2013 Report Posted June 24, 2013 im looking to get the 1/0 cca spool but came across a post stating the 1/0 lugs do not fit the 1/0 wire, that the 2/0 lugs would be needed. in this correct? just need to know so i can finish my order list. also, if the 1/0 is bigger than 1/0 wire, would i also need reducers on the amp? Quote
Sutliff Posted June 25, 2013 Report Posted June 25, 2013 I am interested in this response, too. Quote Zeke '14 2003 Chevy Monte Carlo SS Vehicle Details & Mod List: http://www.stevemeadedesigns.com/board/garage/vehicle/1703-chevrolet-monte-carlo-ss/ Audio Build Log: http://www.stevemeadedesigns.com/board/topic/143276-2003-chevy-monte-carlo-ss-audio-build-ib-build Pioneer FH-P8000BT Infinity Kappa Perfect 6.1 Fi IB3 (Two 12", 2-ohm SVC) RF T400-2 & T500-1bdCP MechMan S Series 240A XS Power D3400 & D975
Rockford96 Posted June 25, 2013 Report Posted June 25, 2013 Im pretty sure thay sky high 1/0 lugs fit sky jighs 1/0 and sky highs 2/0 fits sky highs 2/0 i thinks its just other brands lugs that dont fit his 1/0 Quote My setup, Digital Designs M80 3 Re audio 10's ported tuned to 36 hz Kenwood x-696 SHCA 0 gauge Polk audio coax running off hu
Swordlordboy1234 Posted June 25, 2013 Report Posted June 25, 2013 This 1/0 wire will fit into most amp terminals, and it will fit into dual inputs from PDB and TM, but it will need a 2/0 copper lug to fit the 1/0. And it will need a 4/0 Lug to fit the 2/0 from SHCA. you most likely will not need a reducer for the 1/0 unless its a cheap amp Quote My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect?
Swordlordboy1234 Posted June 25, 2013 Report Posted June 25, 2013 Edit his lugs will fit his wire 1/0 to 1/0 and 2/0 to 2/0. Any outside lug you need 2/0 for the 1/0 and you need 4/0 for the 2/0 Quote My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect?
nolij1 Posted June 25, 2013 Author Report Posted June 25, 2013 ok thats. my amp is an aq-3500.1. i only asked becuase a person purchased both the wire and lugs from sky high, and the 1/0 wire did not fit the 1/0 lugs. they had to get the 2/0 sky high lugs to fit the wire. Quote
Swordlordboy1234 Posted June 25, 2013 Report Posted June 25, 2013 Their lugs should fit there wire.... I just installed 2 of their spools, 60+ lugs and 70+ shrinks Quote My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect?
nolij1 Posted June 25, 2013 Author Report Posted June 25, 2013 damn 60 lugs. well thanks for the info. ill be putting my order up in the order post. Quote
Swordlordboy1234 Posted June 25, 2013 Report Posted June 25, 2013 Tip... Don't twist the 1/0... Leave it straight, goes in the lugs easier. At least I found so. Quote My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect?
nolij1 Posted June 25, 2013 Author Report Posted June 25, 2013 another good tip thanks. cuase i sure was gonna twist the wire. lmao. Quote
Recommended Posts