covi1234 Posted June 26, 2013 Report Posted June 26, 2013 I was wondering if anyone had run into the same issue I have. Gm side post battery.... I already have the extenders. But I'm out of room. I don't feel as though in have enough thread on the bolt. 2 1/0 lugs and the starter and amp on one. Anyone here make any buss bars for just a few accessories?
Sutliff Posted June 26, 2013 Report Posted June 26, 2013 I have a 03 Monte SS, & cut into mine & used POS & NEG aftermarket terminals ... Yes, cut off the OEM ends, & went from there. Someday soon I will be building POS & NEG cables to re-wire better cables to my starter, since that is where they go. Zeke '14 2003 Chevy Monte Carlo SS Vehicle Details & Mod List: http://www.stevemeadedesigns.com/board/garage/vehicle/1703-chevrolet-monte-carlo-ss/ Audio Build Log: http://www.stevemeadedesigns.com/board/topic/143276-2003-chevy-monte-carlo-ss-audio-build-ib-build Pioneer FH-P8000BT Infinity Kappa Perfect 6.1 Fi IB3 (Two 12", 2-ohm SVC) RF T400-2 & T500-1bdCP MechMan S Series 240A XS Power D3400 & D975
covi1234 Posted June 26, 2013 Author Report Posted June 26, 2013 Yeh I bought aftermarket terminal ends and soldered 4 Guage terminals on all of the stock wiring. Just the extenders are full and didn't know of anyone had made buss bars or what
covi1234 Posted June 26, 2013 Author Report Posted June 26, 2013 Sorry shouldn't say buss bars. Something that could bolt in the stock location and have multiple places to bolt/put wires. Seen some on toolmaker but there for top post batteries
Sutliff Posted June 26, 2013 Report Posted June 26, 2013 What battery are you using? Zeke '14 2003 Chevy Monte Carlo SS Vehicle Details & Mod List: http://www.stevemeadedesigns.com/board/garage/vehicle/1703-chevrolet-monte-carlo-ss/ Audio Build Log: http://www.stevemeadedesigns.com/board/topic/143276-2003-chevy-monte-carlo-ss-audio-build-ib-build Pioneer FH-P8000BT Infinity Kappa Perfect 6.1 Fi IB3 (Two 12", 2-ohm SVC) RF T400-2 & T500-1bdCP MechMan S Series 240A XS Power D3400 & D975
covi1234 Posted June 26, 2013 Author Report Posted June 26, 2013 Just a stock led acid car battery. I can't remember the brand off the top of my head
Pioneerchuck Posted June 26, 2013 Report Posted June 26, 2013 You could use these: http://www.sonicelectronix.com/item_17399_Stinger-SPT55303-Chrome.html?from=3
Sutliff Posted June 26, 2013 Report Posted June 26, 2013 Although I am now using a XS D3400 w/ i-Bar kit - that gives me back my side post capabilities, this is what I have used, for the time being ... After ... Zeke '14 2003 Chevy Monte Carlo SS Vehicle Details & Mod List: http://www.stevemeadedesigns.com/board/garage/vehicle/1703-chevrolet-monte-carlo-ss/ Audio Build Log: http://www.stevemeadedesigns.com/board/topic/143276-2003-chevy-monte-carlo-ss-audio-build-ib-build Pioneer FH-P8000BT Infinity Kappa Perfect 6.1 Fi IB3 (Two 12", 2-ohm SVC) RF T400-2 & T500-1bdCP MechMan S Series 240A XS Power D3400 & D975
Sutliff Posted June 26, 2013 Report Posted June 26, 2013 Oh, ... hmmm, ... Maybe I am totally off the mark with what you need vs. what my needs were. How many cables are you looking to hook up on EACH post? Just one cable that you have combined multiple cables into & now they will not reach? Zeke '14 2003 Chevy Monte Carlo SS Vehicle Details & Mod List: http://www.stevemeadedesigns.com/board/garage/vehicle/1703-chevrolet-monte-carlo-ss/ Audio Build Log: http://www.stevemeadedesigns.com/board/topic/143276-2003-chevy-monte-carlo-ss-audio-build-ib-build Pioneer FH-P8000BT Infinity Kappa Perfect 6.1 Fi IB3 (Two 12", 2-ohm SVC) RF T400-2 & T500-1bdCP MechMan S Series 240A XS Power D3400 & D975
Recommended Posts
Archived
This topic is now archived and is closed to further replies.