Jump to content
DC Sound Lab

Recommended Posts

Does anyone know what this particular sub will run me? Also what sizes are they available in? What is the What kinda power do they take Rms/Max for a daily bump not overkill spl monsters (looking for a loud single woofer setup on least power possible) I dont wanna have to get a 200+ amp alt or more than two batts.

Also does anyone have any experience with the SQ and output of this sub, or any vids, VIDS PLEASE!!!!!

I'm pretty much sold on this woofer or a Pioneer Premier TS-W5102SPL its has absolutely the deepest cleanest bass I have ever heard from an SPL oriented sub of this size.

Not really looking into any other subs, wanna try DC lvl 5's maybe 4's maybe a Rockford T2 if I cant power the lvl 5 with my single 70 amp alt (wow this thing can barely handle 1000wrms with a single batt)

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Does anyone know what this particular sub will run me? Also what sizes are they available in? What is the What kinda power do they take Rms/Max for a daily bump not overkill spl monsters (looking for a loud single woofer setup on least power possible) I dont wanna have to get a 200+ amp alt or more than two batts.

Also does anyone have any experience with the SQ and output of this sub, or any vids, VIDS PLEASE!!!!!

I'm pretty much sold on this woofer or a Pioneer Premier TS-W5102SPL its has absolutely the deepest cleanest bass I have ever heard from an SPL oriented sub of this size.

Not really looking into any other subs, wanna try DC lvl 5's maybe 4's maybe a Rockford T2 if I cant power the lvl 5 with my single 70 amp alt (wow this thing can barely handle 1000wrms with a single batt)

i think they are $550, 2000rms not sure on sizes

you can cook bacon shirtless if you're not a pussy...lol

not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be.

intr.jpg

DC.jpgDC POWER

Link to comment
Share on other sites

wow u guys are fast, nah I'm looking into 10 or 12, 12 being the largest I cant accommodate in my small unforgiving trunk the trunk is 16" x 14" x 34" and that has to accommodate my batteries possibly or the amp possibly one of the either the amp or batteries are going there, with the sub

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

O yeah anyone know what the carbonfiber dustcap option costs, the price with and without PLEASE!

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

i havent finished the CF dust cap yet but it will probly be in the 35 dollar ball park, also headsup on the 10, the motor is bigger than the cut out for the woofer so you would either have to make a split baffel or invert the woofer

DC AUDIO

Phone Number

1(855)SPL-DBZZ

Built by Competitors, for Competitors.

Link to comment
Share on other sites

Rusty how much would a lvl 5 10 or 12 cost me?

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Also, have you gotten any of the technical specs listed above sorted out as they are not on the site, and the sq how is it or is it just an spl woofer, I see where it says that it has been designed to have less flaws that other spl woofers have I assume you are referring to "fart can" subs.

Of course I want a LOUD woofer just not where the SQ is so bad it cant play music.

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

I think I have a problem...It's 3:44 in the morning and I have been reading the forums all day and I'm still up thinking maybe someone will reply and I'll miss it and have to wait til the morning to read it.....Wow I need to get some sleep! :unsure::blush:

edit: I'm on the east coast WV to be exact

Edited by wL<3bass

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

i think all sizes are running 550 a piece if you dont wat to have to get a HO alt the i suggest running a lv4 JMO

the LV5 is gonna require atleast 2k rms and ima sure your gonna need a bigger alt to do so maybe im wrong

but make sure you post up your build once you decide on the woofer

Team O.B.M

'97 Tahoe

Build after the new year!!!

Kenwood kdc-x794/16gig android tablet

6 sets of Crescendo ccx65s

2 18s

2 Sundown saz 4500s

2 Sundown sax 100.4

1 Mechman SMD spec 360a

4 XS d1400s

My Feed Back

http://www.stevemead...showtopic=44841

2lc49k5.jpgub

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1566 Guests (See full list)

×
×
  • Create New...