M4ST3R_OWNER Posted August 1, 2013 Report Posted August 1, 2013 I am redoing my wire and need some info on what's best. I have used a lot of cheap solder in my days, but would like to use something that works best for soldering oversize 0 gauge. I come across both rosin core solder but one is 60/40 and the other 63/37. Its saying 63/37 is better. What do you guys say? Thanks for the help.
Trey_Dog650 Posted August 1, 2013 Report Posted August 1, 2013 Majority get 60/40 and that works just find 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head.
Brandonbkd Posted August 1, 2013 Report Posted August 1, 2013 I've never seen 63/37 but I use 60/40 all the time and it works perfectly FI BL18 Build Log: CLICK HERE!! 2003 Explorer Sport: FI BL18 SoundQubed 2200 at 0.7ohm Pioneer DEH-2500UI Pioneer 6 x 8s Rockford Fosgate 6 x 9s 5 ft^3 box at 35hz Lots of Mega Mat
SnowDrifter Posted August 1, 2013 Report Posted August 1, 2013 No noticeable difference. I use 50/50 when I solder. It just depends on what's on hand ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
M4ST3R_OWNER Posted August 4, 2013 Author Report Posted August 4, 2013 Well I'm give it a try. 63/37 it is. I'll post back how it goes. Thanks
Recommended Posts
Archived
This topic is now archived and is closed to further replies.