pstone11 Posted February 25, 2008 Report Posted February 25, 2008 Been waiting a while to get started on this project. Pretty cool car (no, it's not an STI), some good equipment going in also.. Pair of Lvl 3 DC 12's, BXI1606, Alpine V12 2ch, Phoenix gold components, kicker coax, Soundstream 6 farad cap, Kicker 0 gauge kit.. That's about it... couple hundred blue LED's, chunk of plexi.... This is going to be a little more slow-going than the last couple builds, but that's allright with me. Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
jonathancullen89 Posted February 25, 2008 Report Posted February 25, 2008 sounds like it will be fun, good luck with install and make sure u post build pics! i cant see pics u posed because im at school and admin blocked everything. 1992 cavalier build 1992 blazer s10 kenwood cd hifonics hfi2500d 6 soon to be 12 12" hifonics hfi12d4's shit ton-o-wire Blurred Vision Audio Team SMD feedback/refs. clicky!-
pstone11 Posted February 25, 2008 Author Report Posted February 25, 2008 Put in a little work this weekend, man the trunk floor of this sucker is uneven. Started with the front false floor where the box will sit, laid down a layer of mat in that area, then lots of shimming to get the supports straight.. Here's where the port goes.. Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
FieroGrande Posted February 25, 2008 Report Posted February 25, 2008 wow that floor is uneven. Good start.
pstone11 Posted February 25, 2008 Author Report Posted February 25, 2008 The spare tire well is going to be for the amps, and anything else I can fit down in there. The original plan was to glass the front half of the well into the box for added airspace, but I squeezed a 4.3 net box into there, so I can work with that.. This box is kind of a mock-up for now since I won't have the car here much. Had to clearance the front corners of the box to get it nice and snug under the rear deck support (where the support curves down on the corners). I'll get those guys glassed in sometime this week. nice tight fit. Still have a ton of room to work with.. Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
connersdad19 Posted February 25, 2008 Report Posted February 25, 2008 nice car this is gonna be good.
pstone11 Posted February 25, 2008 Author Report Posted February 25, 2008 nice car this is gonna be good. This is gonna be loud. I love having that huge armrest hole to work with. It's just begging to have a port stuck up in there. Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
IH8PunkRok Posted February 25, 2008 Report Posted February 25, 2008 im likin it ur always takin on the hard challenges -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build
95pimpalass Posted February 25, 2008 Report Posted February 25, 2008 nice.. are the subs gonna face the back seats with the port in the middle(if ported enclosure), or..
pstone11 Posted February 25, 2008 Author Report Posted February 25, 2008 nice.. are the subs gonna face the back seats with the port in the middle(if ported enclosure), or.. Yup, you got it. It'll be mostly sealed off with trim panels but it's not going to need much with the port wide open into the inside like that. Forgot, there's also 100 sq ft of deadener for this car.... mostly for the trunk, but we'll see what else rattles. Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.