Jump to content

'05 Ford Escape Limited *SKAR AUDIO BUILD*


Recommended Posts

Hey guys,

I'd like to give a quick run down about myself before I start. My names Mike I'm from Brampton Ontario Canada recently just started my own business, SOS Autosport in retail and installation of car stereos and 12v equipment. We move into our shop September 15th and we're very excited! I've been installing for just over 10 years all my vehicles prior to this have had stereos but nothing quite like this. I had a '03 Mazdaspeed Protege in which got written off in a bad accident almost a month ago now.

As far as I know there is no one in Ontario running Skar Audio, as far as I know we are the only retailer in Ontario retailing for Skar, but please correct me if I'm wrong. So I spoke with Kevin and told him I'd love to get the name out here since it seems to be huge in Florida thought it would be great budget equipment for guys down here and decided to pick up a '05 Escape limited now that the protege is wrecked and build it into Canada's Skar Audio demo vehicle.

ON WITH THE BUILD!

EDITED 12/08/13

as of december 8th I've changed what the build will be consisting of, read below for details.

Kenwood DDX719 headunit
(6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door
(4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front door
(1) set of 6.5" Skar Audio VXI65 Components in the rear doors
(4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohm
(2) Skar Audio SK-2500.1
(2) Skar Audio LP-80.4 - powering mids/tweeters
(4) runs of 1/0 cable front to back
(5) group 34 batteries - 1 up front, 4 in back
all T SPEC v12 series RCA cable

C-pillar flat wall


Deck is currently a Kenwood KDC-X693 hopefully upgrading to a nice double din soon.
Still figuring out where I'm getting deadening, wire, and batteries from and whatever else I forgot to mention. So far I've just got the subs, sub amp, and front components in. But that's the basics now. Were currently thinking of doing a box with the subs mounted staggered using 2 8" aeroports.

PICS:

1151010_10151644235208041_2105305809_n_z
1006047_10151644235428041_1612460835_n_z
1185716_10151644235383041_1181809225_n_z

The truck when I picked her up not long ago, shes fully loaded with black leather interior, heated seats, sunroof, parking sensors, auto dimming rearview mirror, auto headlights, lol. big step up from the rides I've had before!
1151010_10151612678213041_1773858800_n_z

Came across a crazy deal, had to grab these! 20s mounted on practically brand new 255/45/20 falken tires

944639_10151621456828041_2115865971_n_zp

Only pics I have of them mounted are these shitty quality instagram ones, I'll get some better ones later

1234398_10151644244953041_313851143_n_zp

1174836_10151627259373041_457948773_n_zp

that's it for now, stay tuned for more updates! Also if you have instagram you can follow me and my build on there, @SOSAutosport





Deck: Kenwood DNN990HD
Front Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front door
Subs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohm
Sub Amps: (2) Skar Audio SK-2500.1
Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweeters
Wire: (4) runs of 1/0 cable front to back, T SPEC V12 RCA
Batteries: (5) group 34 batteries - 1 up front, 4 in back
C-pillar flat wall


Buid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/

Link to comment
Share on other sites

I want to wall it but at the same time I don't. If I did I'd regret it down the road, also I figure if I do a wall I don't want it to be just in my trunk I'd rather it take up the back seat all the way back, if your gonna do it, do it right!

We measured it out and it will work, the box is going to be quite tall, port we haven't decided whats best either aeroports or a slot port


Deck: Kenwood DNN990HD
Front Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front door
Subs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohm
Sub Amps: (2) Skar Audio SK-2500.1
Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweeters
Wire: (4) runs of 1/0 cable front to back, T SPEC V12 RCA
Batteries: (5) group 34 batteries - 1 up front, 4 in back
C-pillar flat wall


Buid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/

Link to comment
Share on other sites

I want to wall it but at the same time I don't. If I did I'd regret it down the road, also I figure if I do a wall I don't want it to be just in my trunk I'd rather it take up the back seat all the way back, if your gonna do it, do it right!

We measured it out and it will work, the box is going to be quite tall, port we haven't decided whats best either aeroports or a slot port

If you guys are still undecided on wire I would like to suggest Sky High. I can hook you up with a packaged deal for a full install. I also think we have a dealer in Canada.

2013 Dodge Charger

Build Log


1996 Ford Explorer XLT 5.0
Build Log

2005 Honda Civic LX Coupe

Build Log

SMD SUPER SELLER!!!!
My Selling Feedback

Dresig1_zps7acbddbb.gif

Dresig2_zpscfb11527.gif

Link to comment
Share on other sites

love the escape (wish mine never blew up) but i would say WALL it. what i wanted to do to mine but never happened.

2012 Chevy sonic1xSQ HDC3 12 D2RF R1200d

140 square foot of Q-Mat(soon to be installed)

140.2Db sealed on the dash with TL

142 DB sealed on the dash with another meter (was dead on with the TL at a show i was at)

141 on music.

strangeduck,on 02 Jan 2014 - 01:39 AM, said:

when my car spins out i just put the car in neutral, turn in the direction i want to go and pucker my asshole

Link to comment
Share on other sites

I want to wall it but at the same time I don't. If I did I'd regret it down the road, also I figure if I do a wall I don't want it to be just in my trunk I'd rather it take up the back seat all the way back, if your gonna do it, do it right!

We measured it out and it will work, the box is going to be quite tall, port we haven't decided whats best either aeroports or a slot port

If you guys are still undecided on wire I would like to suggest Sky High. I can hook you up with a packaged deal for a full install. I also think we have a dealer in Canada.

Yes, we are ;) we ordered 250 ft red, and 250ft black 8 awg sky high wire to have on hand for installs and its great quality stuff.


Deck: Kenwood DNN990HD
Front Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front door
Subs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohm
Sub Amps: (2) Skar Audio SK-2500.1
Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweeters
Wire: (4) runs of 1/0 cable front to back, T SPEC V12 RCA
Batteries: (5) group 34 batteries - 1 up front, 4 in back
C-pillar flat wall


Buid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 679 Guests (See full list)

×
×
  • Create New...