SOSAutosport Posted August 25, 2013 Author Report Share Posted August 25, 2013 Anyone know a place online or local in Canada by any chance to get 8" aeroports? or just 4 of the flares Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
SMZ2 Posted August 25, 2013 Report Share Posted August 25, 2013 Anyone know a place online or local in Canada by any chance to get 8" aeroports? or just 4 of the flaresI'm in the states but there is a guy on caco who makes them cheap. I emailed him about some I'll see if I can find his email. Also I'm tuned in man!Edit: the email is [email protected] My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
SOSAutosport Posted September 9, 2013 Author Report Share Posted September 9, 2013 Thanks buddy! We managed to grab a couple local, hopefully box build will be up this weekend.... today we decided to start mocking things up temporally as I'm just hurting to hear these things!So we started making room for one of the 2 back battery's to fit in the left quater, box is going to be 12 cu/ft before port. 2 8" aeros is the plan. Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
cj92 Posted September 9, 2013 Report Share Posted September 9, 2013 Hey man good start i used to have an 05 that was grey limited edition 4x4 great vehicle wish i never would have gotten rid of it, fun as hell keep up the good work. New Build 92 Wagon http://www.stevemeadedesigns.com/board/topic/193327-back-with-a-new-build-1992-taurus-wagon/ Old 2005 Ford Mustang Build http://www.stevemeadedesigns.com/board/topic/174628-05-mustang-build-update/ Check out my Old build 98 Honda Accord http://www.stevemeadedesigns.com/board/topic/163280-1998-honda-accord-build/ Link to comment Share on other sites More sharing options...
SOSAutosport Posted September 13, 2013 Author Report Share Posted September 13, 2013 provided everything goes smoothly tomorrow should have the box assembled, braced, subs in, and amp wired for testing tomorrow. Just dying to hear it, lol. Decided to go bottom slot port, and subs inverted. EVERYTHING is going to be torn out soon to be deadened, resin the box, run more wire under the carpet, etc Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
321slapinbass Posted September 13, 2013 Report Share Posted September 13, 2013 you running the 2500.1 at 0.5 ohms? 2000 Dodge Durango Subs - (2) SKAR VVX 15 D2's Box - 7.2 ft^3 @ 33hz, 120 in of port Sub amp - Digital Designs M2 @ .5 ohm Mids + Highs - PRV Audio Mids + Highs amp - Hifonics 2000.4 Headunit - Alpine CDE-100 Equalizer - Clarion EQS746 Batteries - Mopar group 27 + (2) C&D 52ah Wiring - 1/0 BIG 3, (2) runs 1/0 Alternator - Singer 250A 147.79 dB @ 35hz - burp - sealed on dash 147.47 dB @ 35hz - music - sealed on dash YOUTUBE: http://www.youtube.com/user/321slapinBass/videos Link to comment Share on other sites More sharing options...
brendanthekid Posted September 13, 2013 Report Share Posted September 13, 2013 Looks like it's gonna be a beast system! I also run Skar in canada down here in Windsor but DAMN those black women are fucking scary facebook.com/brendan.laliberte.3 Link to comment Share on other sites More sharing options...
graham0599 Posted September 13, 2013 Report Share Posted September 13, 2013 I like the build. Let me know how you like those batts! Also, I do agree with the c-pillar wall idea. I'd think you'd have enough room My 350z build- http://www.stevemeadedesigns.com/board/topic/174424-2008-350z-build/page-2?hl=%2B350z+%2Bbuild#entry2605678 Link to comment Share on other sites More sharing options...
Jman08 Posted September 13, 2013 Report Share Posted September 13, 2013 Like the escape man! Youtube.com/J Hutch22 Link to comment Share on other sites More sharing options...
SOSAutosport Posted September 17, 2013 Author Report Share Posted September 17, 2013 thanks guys. yeah the 2500.1 is ran at .5 ohm. was demo'ing all day saturday subs or amp didn't even get warm. Voltage was fairly steady for what it was too. Only the front battery is wired up for now, 1 run of 0 for power and 1 run of ground from the front battery to the 2500.1. back battery will be wired up soon as I get some extra time.TO DO STILL:wire up back batterydeaden EVERYTHINGadd extra bracing to the boxPL/resin in the boxrhino liner the boxthats all I can think of at the moment. lolSo we threw the box together its about 10 cubes at 29hz before port/subs. Probably should of done it differently but i wanted to try this and see how it goes/sounded. So heres how that all went..........we used sky high audio cables 8 gauge for speaker wire. AWESOME quality stuff if your in the market for some wire check these guys out!mounted the 2500.1 on the back seat, threw it all in and called it a day! Left the shop at 12am... few hours of sleep and off to a show the next morning managed to do a 148 on the termlab @ 46hz ... Aiming for the 50s after all my to-do things are complete.been running it all inverted given the size of the box, port back for now. I'm surprised the number i achieved given this box has got to be choking these subs out. Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.