Brandonbkd Posted September 17, 2013 Report Share Posted September 17, 2013 You should plasti dip them wheels black FI BL18 Build Log: CLICK HERE!! 2003 Explorer Sport: FI BL18 SoundQubed 2200 at 0.7ohm Pioneer DEH-2500UI Pioneer 6 x 8s Rockford Fosgate 6 x 9s 5 ft^3 box at 35hz Lots of Mega Mat Link to comment Share on other sites More sharing options...
SOSAutosport Posted September 17, 2013 Author Report Share Posted September 17, 2013 You should plasti dip them wheels black Thinking about powder coating them. Not a fan of plasti dip Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
graham0599 Posted September 17, 2013 Report Share Posted September 17, 2013 And you should wall it at the C-Pillar! Not bad score either for a tiny box My 350z build- http://www.stevemeadedesigns.com/board/topic/174424-2008-350z-build/page-2?hl=%2B350z+%2Bbuild#entry2605678 Link to comment Share on other sites More sharing options...
SOSAutosport Posted September 19, 2013 Author Report Share Posted September 19, 2013 Had some time the other day so we decided to take out the box and have the port face forward since it was being obstructed facing the back as well has wire up the back battery. Sounds alot cleaner and louder now after both of those, hopefully have some meter time in before Saturdays show. Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
zrkie Posted September 19, 2013 Report Share Posted September 19, 2013 If u swap to make the port play backwards it probably increase... have you tried that? Don't like sharing your knowledge? Welll.. Don't come here and grab others then! - GTFO. Link to comment Share on other sites More sharing options...
SOSAutosport Posted September 19, 2013 Author Report Share Posted September 19, 2013 it did a 148 @ 46hz that way Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
SOSAutosport Posted September 22, 2013 Author Report Share Posted September 22, 2013 with the port forward now gained a bit, its getting there. We deadened the liftgate after this number but didnt have time to test again to see if any gains. Probably won't see any major increases until we resin.Thinking of doing a different box idea now, will have info on that soon Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
medley123 Posted September 24, 2013 Report Share Posted September 24, 2013 Maybe try port up? I've seen an explorer that had better numbers sub forward port up than he did with port back. Just a thought. GL with the 150! Don't see many Escapes on here 2006 Ford EscapeHead Unit: Kenwood KDC 352Subs: (3) 15" DC XL 15s with PSI recones, 1.4 ohm coilsSub amp: DD Audio M4 (Black Version)Door Speakers: (2) Crossfire 10s, (2) Hertz Coax.Mid/highs amp: Rockford Fosgate P500-4 Electrical:XS D3400 under the hood(3) XS XP3000s in the back2 runs of KnuKonceptz OFC 0 Gauge ran to the back (1 pos, 1 neg)Excessive Amperage 300 amp alt (FINALLY!) Link to comment Share on other sites More sharing options...
SOSAutosport Posted October 2, 2013 Author Report Share Posted October 2, 2013 Not enough hours in a day.... sorry for not having much updates lately on this guys. Got around to doing the voltmeter today, wired at the amp. Also got ahold of a couple dual inputs for the amp whenever I've got more time to run some more wire. Hopefully start on the doors soon. Having more bass then vocals is killing me. Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
SOSAutosport Posted October 25, 2013 Author Report Share Posted October 25, 2013 haven't had alot of time to really do much with this build, been busy with the shop with remote starter season and what not. But I did get around to doing the hid's and tint. Hopefully start on the doors soon...8000k headlights and 12000k fogs18% up front and 5% in the rear Deck: Kenwood DNN990HDFront Stage: (6) 8" Skar Audio PAX-8 Pro Audio Speakers - 3 in each front door (4) 1" Skar Audio VX1-ST Bullet Tweeters - 2 in each front doorSubs: (4) 15" Skar Audio VVX-15v2 Dual 4s wired at 1 ohmSub Amps: (2) Skar Audio SK-2500.1Mids/Highs Amp: (2) Skar Audio LP-80.4 - powering mids/tweetersWire: (4) runs of 1/0 cable front to back, T SPEC V12 RCABatteries: (5) group 34 batteries - 1 up front, 4 in backC-pillar flat wallBuid Log: http://www.stevemeadedesigns.com/board/topic/174250-05-ford-escape-limited-skar-audio-build/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.