[email protected] Posted November 27, 2013 Report Posted November 27, 2013 Hello people, this is my first Post, soo my cuestion today is... What config in this amp will be the best.. My subwoofer is a Pioneer Premier 400w RMS, and in SPL this system is getting 138.7Db, but I have not configured the amplifier , Subwoofer Gain is on +6, but dont know where to put Low pass configuration. Sorry for my english
hazestorm23 Posted November 27, 2013 Report Posted November 27, 2013 Where was the 138.7 read in the car? And by low pass conf you mean the low pass frequency right?
[email protected] Posted November 27, 2013 Author Report Posted November 27, 2013 the termlab sensor was in the glass, this was done in a competition... Yeah i mean the low pass frequency.. my car is a Nissan Sentra 2005..
jarrius Posted November 27, 2013 Report Posted November 27, 2013 Is your box ported if so what is it tuned to. 2012 Chevy sonic1xSQ HDC3 12 D2RF R1200d 140 square foot of Q-Mat(soon to be installed) 140.2Db sealed on the dash with TL 142 DB sealed on the dash with another meter (was dead on with the TL at a show i was at) 141 on music. strangeduck,on 02 Jan 2014 - 01:39 AM, said: when my car spins out i just put the car in neutral, turn in the direction i want to go and pucker my asshole
[email protected] Posted November 29, 2013 Author Report Posted November 29, 2013 This is my subwoofer, its side ported?
twisted1 Posted November 30, 2013 Report Posted November 30, 2013 Youtube.com an then search setting lpf. Orrrrr you can buy cc1 09 mustang gt
[email protected] Posted December 1, 2013 Author Report Posted December 1, 2013 This are my settings : Im just a noob trying to learn, please teach me
[email protected] Posted December 1, 2013 Author Report Posted December 1, 2013 Some One help me please...
Noel989 Posted December 1, 2013 Report Posted December 1, 2013 Gain is suppose to be matched/not exceed RCA voltage. So it won't clip/distort. To do that you'll need a dd-1 or ocilliscope The low past filter is suppose to be ~80hz. The only way I know how to set is with a cc-1 The subsonic filter is suppose to be a few hz lower than what your box is tune too. The only I know how to set it is with a cc-1 And bass boost all the way down Build Log - http://www.stevemead...-cruiser-el-pt/
[email protected] Posted December 2, 2013 Author Report Posted December 2, 2013 Okk, thanx for the answers dude, the only problem is that i live in Honduras and here no body sales DD-1 and CC-1.. This is my subwoofer manual: Dont know if the input level is the same as Gain in other amps? This is my head unit specification, it says no more than 0.4 v
Recommended Posts
Archived
This topic is now archived and is closed to further replies.