Aj11 Posted February 10, 2014 Report Share Posted February 10, 2014 yea I'll make a video of my destroying the Rf P2. i just hope it goes quick because my phone wont let more then a 2 minute video load from photo bucket. jvc deck stinger 1800 front hc 2000 kinetic rear 2 runs of 1/0g big 3/4 ct 60.4 2 ct 1400.1 ct EXO 15 d1 lots of deadner type r comps front stage 6 kicker tweets rear stage lots of great stuff coming soon ho alt more bats ct comps for front stage more deadner sweet amp rack lots of L.E.D lights new deck (thinking 80 prs, or flip out) Link to comment Share on other sites More sharing options...
lesstutrey Posted February 10, 2014 Author Report Share Posted February 10, 2014 Ok, so there is obviously one competitor to both these amps, put out by the same brand, rockford fosgate. The R750.1D and the R600.4D but there seems to be a mixed bag on RF.. some people love, some people hate. The 750w would be like 40 dollars cheaper and 600w (vs 680) would be like.. 17$ less, so 67$ savings. Pretty sure i'm just gonna go the SQ route.. as i wasn't recommended RF. Definitely gonna replace the RE, amps should match in a show car imo. Link to comment Share on other sites More sharing options...
lesstutrey Posted February 10, 2014 Author Report Share Posted February 10, 2014 Yeah, went the SQ route. Q1 750 and Q4 120. Thanks for the advice guys. Link to comment Share on other sites More sharing options...
lesstutrey Posted February 13, 2014 Author Report Share Posted February 13, 2014 Oh, question regarding these amps which their site doesn't seem to answer: fuse ratings for the amps... one has 2x40 onboard (Q4) and the other has 3x30a so 100a fuses should be good, right? Link to comment Share on other sites More sharing options...
bighossf150 Posted February 13, 2014 Report Share Posted February 13, 2014 Running both amps off a single run of 1/0? If so a 175-200 amp should be good Used to have a loud truck 2009 Corvette Z06, H/C/I, 150 shot, g force tune, 730rwhp/690rwtq 2013 F-150 limited, MPT Tune, leveled on 35"s Link to comment Share on other sites More sharing options...
lesstutrey Posted February 13, 2014 Author Report Share Posted February 13, 2014 Actually was rethinking this. I got a dual amp kit with terminals etc, that has a 0/1 run to a distribution block with dual 4 gauge fused output. However, i'm running a trunk battery (XS D3400). The 0/1 is actually gonna be unfused link to the starter, and am probably gonna add in a live wire kill solenoid for it. So the two 100a i got for the dual fuse distro block (which currently has 60a's in each slot, may run a 60a to the q4 since it will be at 4 ohm and is overpowering my ID CTX 65s by 20% so will probably be much lower than the clipping point on gains) will be all i need apart from the 200a for my alternator charging wire (200a alternator) which is coming from a 4 channel kit with 4 gauge wire. I also got a triple battery terminal splitter for the XS, so this should all work out well.. plenty of terminals to connect to. may need to do a very small run of 0/1 to the distro block, no biggie, have an inline fuse from the dual amp install kit that i can put a 200a into if really needed (guessing it has a fuse included since it has a inline ANL holder for the 0/1 but it wasn't listed as to what amperage it was). Of course i'll do a big 3 grounding as well.. pretty much required with a trunk mounted starter. Link to comment Share on other sites More sharing options...
poorfish88 Posted February 13, 2014 Report Share Posted February 13, 2014 My vote is for the Rockford P500X1BD I just bought that amp for my wife's car, it's a typical RF amp...BAD ASS! Link to comment Share on other sites More sharing options...
lesstutrey Posted February 13, 2014 Author Report Share Posted February 13, 2014 hum, aj wants to destroy his RF P2, and i have this JL W3v1 12" i've had for ages.. wonder if it would take the 750w+ the q1 is putting out.. i mean.. possibly... and i have 120fps video cam.. Link to comment Share on other sites More sharing options...
kirill007 Posted February 13, 2014 Report Share Posted February 13, 2014 Ok, so there is obviously one competitor to both these amps, put out by the same brand, rockford fosgate. The R750.1D and the R600.4D but there seems to be a mixed bag on RF.. some people love, some people hate. The 750w would be like 40 dollars cheaper and 600w (vs 680) would be like.. 17$ less, so 67$ savings. Pretty sure i'm just gonna go the SQ route.. as i wasn't recommended RF. Definitely gonna replace the RE, amps should match in a show car imo. People saying RF is trash are wrong and clearly do not know what they are talking about. RF has some of the best amps quality wise and considering price/performance. I would take RF over CT sounds and AQ/soundqubed and certainly audio technix. (higher quality standard, better customer service) Thinking is the root of all problems... You ALWAYS get what you pay for. Link to comment Share on other sites More sharing options...
Crandis16 Posted February 13, 2014 Report Share Posted February 13, 2014 just curious... how much does that audiocubed run for online? My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.