CodyHendo Posted February 16, 2014 Report Posted February 16, 2014 I have a Rockford Fosgate p1000.1 or bd, whatever it is. haha the punch series 1000. I was wondering if anyone has ever tried using 1/0 to 4 gauge reducers in any of the rockford punch amps, or any rockford amps in general? Thanks in advance!
n8ball2013 Posted February 16, 2014 Report Posted February 16, 2014 Why not run the right wire to it THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
CleanSierra Posted February 16, 2014 Report Posted February 16, 2014 The amp doesn't need 1/0 wire, that's why Fosgate choose to use 4 gauge inputs. Im not the one you want to try to troll. Just a fyi for you.
CodyHendo Posted February 16, 2014 Author Report Posted February 16, 2014 Because i already have 0 gauge wire. lol forgot to put that. I already have 0 gauge power and ground runs and would like to keep them for when i get a bigger amp, instead of buying new wire for a few months.
CodyHendo Posted February 16, 2014 Author Report Posted February 16, 2014 Why not run the right wire to it The amp doesn't need 1/0 wire, that's why Fosgate choose to use 4 gauge inputs. its above. lol forgot to quote and write under it.
Turboelky Posted February 16, 2014 Report Posted February 16, 2014 I think a guy "tool maker" makes reducers. Or just use a dist. block that goes from 0 in to 4 out.
CleanSierra Posted February 16, 2014 Report Posted February 16, 2014 I just bought these: I'm not sure they would work on the P1000bd. You could try contacting Toolmaker on Facebook and see if they make a 1/0>>4 gauge reducer. Im not the one you want to try to troll. Just a fyi for you.
CodyHendo Posted February 16, 2014 Author Report Posted February 16, 2014 I think a guy "tool maker" makes reducers. Or just use a dist. block that goes from 0 in to 4 out. I know how and where to get them, just the rockford inputs are a little strange so i wanted to know if anyone has done it yet before i buy some inputs.
CodyHendo Posted February 16, 2014 Author Report Posted February 16, 2014 I just bought these: I'm not sure they would work on the P1000bd. You could try contacting Toolmaker on Facebook and see if they make a 1/0>>4 gauge reducer. Thats what ill do when i get a bigger amp, dual inputs. I was looking at sky high reducers because i can get a little better price. but we shall see.
Guest Posted February 16, 2014 Report Posted February 16, 2014 cut strands off the 0 gauge. its free.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.