Coolwazabi Posted March 15, 2008 Report Share Posted March 15, 2008 ekk i did two front windows on a silverado today... omg we need to powerwash our floor. After a remote start season our floor is soo dirty, I was getting dirt like no other in the tint. The driver side took me three pieces before I got on that met my standards. First tint job of 2008 for me... i still got it did you just do the part of the window you could see... or all the window including the part thats inside the door and above the glass ? Link to comment Share on other sites More sharing options...
talentfinder36 Posted March 15, 2008 Report Share Posted March 15, 2008 did you just do the part of the window you could see... or all the window including the part thats inside the door and above the glass ? You cover all the window that you can see and about 1 1/2" into the door gasket (part you can't see) Mark 99 Eclipse Spyder Link to comment Share on other sites More sharing options...
Shyne151 Posted March 15, 2008 Report Share Posted March 15, 2008 did you just do the part of the window you could see... or all the window including the part thats inside the door and above the glass ? I usually go about a half inch to an inch below the bottom seal and starting at the end of last year we started filling the top of widows so that the tint meets all the way to th topl,,, so there is no gap at the top. Before we were leaving about a 1/8" at the top. -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.