Gravlin216 Posted February 21, 2014 Report Posted February 21, 2014 I just ordered 2 FI BL dual 2 ohm 12's,there gonna be powered by a 1500 BDCP I looked at wiring diagrams before I purchased and thought I could have both subs running at a 1ohm load.Now I'm thinking I was wrong.Is there any way thats possible if not what's the right way to wire them to get the most power,and is that 1500 per sub or split in half for 1500 total?One day I'll understand all this shit...
Karkov Posted February 21, 2014 Report Posted February 21, 2014 .5 OHM or 2 OHM if you use that single amplifier on both subs together. EDIT: You have 1 RF T1500bd CP correct? technically then that's 1500 watts RMS divided by 2 so 750 per sub. Dynamically speaking your subs have potential to see more than that. You can give those subs 1 amp per and then run each amp at 1 ohm and be happy all day long. =) Those subs are rated at 1500 watts RMS correct? 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0
Gravlin216 Posted February 21, 2014 Author Report Posted February 21, 2014 2ohm = negative to positive jump?
Gravlin216 Posted February 21, 2014 Author Report Posted February 21, 2014 .5 OHM or 2 OHM if you use that single amplifier on both subs together. EDIT: You have 1 RF T1500bd CP correct? technically then that's 1500 watts RMS divided by 2 so 750 per sub. Dynamically speaking your subs have potential to see more than that. You can give those subs 1 amp per and then run each amp at 1 ohm and be happy all day long. =) Those subs are rated at 1500 watts RMS correct? Yes and I'm either gonna do that or get a 2500 instead.
Karkov Posted February 21, 2014 Report Posted February 21, 2014 2ohm = negative to positive jump? http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=22#results 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0
Karkov Posted February 21, 2014 Report Posted February 21, 2014 Not sure what you have bought so far but those 2 subs can easily take 3K+ RMS (combined) on the daily so even a 2500 would be a little behind on peak efficiency IMO. 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0
Gravlin216 Posted February 21, 2014 Author Report Posted February 21, 2014 Not sure what you have bought so far but those 2 subs can easily take 3K+ RMS (combined) on the daily so even a 2500 would be a little behind on peak efficiency IMO. I just received the 1500 today and the subs are being built now,don't have another $700 for another 1500 right now all I have is a RF1000 that's in my car now.Would it not be ideal to have 1 sub on the 1500 and 1 on the 1000.
Kyblack76 Posted February 21, 2014 Report Posted February 21, 2014 Get another 1500 and run it at 1ohm SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Gravlin216 Posted February 21, 2014 Author Report Posted February 21, 2014 If subs weren't built yet and I called them and switched it to dual 1 ohm would I be able to get a 1 ohm load out of that?
Gravlin216 Posted February 21, 2014 Author Report Posted February 21, 2014 Actually I have 2 RF T0 12's with a 1000bdcp I wont be using so I'll just seel that shit and get another 1500 and battery
Recommended Posts
Archived
This topic is now archived and is closed to further replies.