KenC210 Posted February 28, 2014 Report Posted February 28, 2014 (edited) Looking to get these for a buddies build does any one know the depth needed and how wide the magnet is? Edited February 28, 2014 by KenC210 Quote Kids Cadi Power Wheel Build2007 Ford Escape Build2012 Toyota Corolla Build 2013 Toyota Tundra
KenC210 Posted February 28, 2014 Author Report Posted February 28, 2014 http://www.stevemeadedesigns.com/board/topic/153287-sundown-sa-65cs-pre-order/ I tired looking here by I can't read the dimensions... Anyone have a good picture of the dimensions? Quote Kids Cadi Power Wheel Build2007 Ford Escape Build2012 Toyota Corolla Build 2013 Toyota Tundra
gr8handogoatness Posted February 28, 2014 Report Posted February 28, 2014 Mounting depth is 2 5/8 inches. Magnet is like 3 5/8 in diameter. The terminals are push terminals so if space is limited and you have the magnet going in a hole or something just keep in mind that the terminals need 1 3/4 inches of clearance. Sorry I don't have pictures, but I have the speakers right in my garage so I can measure whatever you need. I'm not gonna post pics though sorry. I really like these by-the-way. They are some great speakers for the price. I ran them HP at 80hz on 120 watts each side, they would scream. They didn't sound quite as good as my JL XR650s so I put the JLs back in, but for less than half the price I forgive them. Also I say they don't sound as good, but that's at high volume. Medium volume they sound smooth and clear. I mean they didn't sound as good with the volume up to the point where you aren't sure if you should go anymore, like 2 clicks from clipping kind of loud. Quote
gr8handogoatness Posted February 28, 2014 Report Posted February 28, 2014 Mid Diameter of outermost part of frame 164.5mm=6.48inches Diameter from just inside the lip of the outer frame 151mm=5.95inches Top of surround to bottom of magnet 72.5mm=2.85inches Top of frame to bottom of magnet 70.5mm=2.78inches Bottom of frame to bottom of magnet (Minimum mounting depth) 66.2mm=2.6inches Diameter of magnet 85mm=3.35inches Minimum cut-out diameter 142mm=5.6inches Tweeter Diameter of outermost plastic 54.5mm=2.15inches Top of grill to bottom of housing 25mm=.98inches Minimum mounting depth 17mm=.67inches Minimum cut-out diameter 45mm=1.77inches Quote
gr8handogoatness Posted February 28, 2014 Report Posted February 28, 2014 What is Jacob doing putting these in mm anyway. This is 'merica Jacob. Quote
KenC210 Posted February 28, 2014 Author Report Posted February 28, 2014 Thank you for the great information... That what I needed it's hard to see pictures on mobile... Quote Kids Cadi Power Wheel Build2007 Ford Escape Build2012 Toyota Corolla Build 2013 Toyota Tundra
sundownz Posted February 28, 2014 Report Posted February 28, 2014 What is Jacob doing putting these in mm anyway. This is 'merica Jacob. LoL I always design in millimeters. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
sundownz Posted February 28, 2014 Report Posted February 28, 2014 Mounting depth is 2 5/8 inches. Magnet is like 3 5/8 in diameter. The terminals are push terminals so if space is limited and you have the magnet going in a hole or something just keep in mind that the terminals need 1 3/4 inches of clearance. Sorry I don't have pictures, but I have the speakers right in my garage so I can measure whatever you need. I'm not gonna post pics though sorry. I really like these by-the-way. They are some great speakers for the price. I ran them HP at 80hz on 120 watts each side, they would scream. They didn't sound quite as good as my JL XR650s so I put the JLs back in, but for less than half the price I forgive them. Also I say they don't sound as good, but that's at high volume. Medium volume they sound smooth and clear. I mean they didn't sound as good with the volume up to the point where you aren't sure if you should go anymore, like 2 clicks from clipping kind of loud. Glad you like them -- the comparison to the XR set is a compliment. I used to own that set years ago until I bought a Linear Power 2.2HV and popped the mids Switched to some Morel MW-168 and kept the tweeters. IIRC that was in 2001-2002 or so. I think you will really like some of the future components I am working on that will keep getting louder well beyond what the SA set will -- but will also retain the smooth sound. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
gr8handogoatness Posted February 28, 2014 Report Posted February 28, 2014 Oh man, I'm trying to be patient. Been waiting for some new Sundowns. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.