Jump to content
Sky High Car Audio

Thoughts/Opinions on wiring choice before I purchase?


osiris10012

Recommended Posts

Posted

Hey everyone I am about to purchase a bunch of wiring from sky high, but want to hear your opinions before I do so. The amp I am using is a precision power bk1800.1 and once I get new subs in the future I will be running it at 1 ohm and it is rated for an output of 1800 rms. I love the looks and reviews of sky high products so I am 100% sure I will be purchasing from them. Here is a list of what I plan to buy.

50ft of 1/0 CCA

25ft of 12 gauge CCA speaker wire

3x 1/0 set screw fuse holders

3x 150A fuses

1 pack of SHCA shrink/terminals

My main question is about the CCA wiring. I wasn't sure if that would be a good choice or should I go with OFC for my set up. I figured 1/0 CCA would work well for my application because I will only be running 1800 rms. I plan to use the 50 ft for the amp pwr and grd plus do the big 3. This is also the reason I chose 3 fuses. My amp doesn't have an onboard fuse so it calls for an external. I will use one for the amp, battery and alternator. Any comments are welcomed. I just want to be sure of my purchase because I only want to do this once. Thank you in advance.

Posted

if you plan on upgrading down the line i would get OFC. thats less wire you have to buy in the future. just something to think about

This page is crispy_chick3n approved.

© crispy_chick3n inc

Posted

If it was me, I would buy OFC. I have my reasons.

Not gonna divulge into the endless debate.

2007 Chevy Tahoe (SOLD)

12 ~ FI Audio X series 10" w/BP option

2 ~ DC Audio 5.0K @0.67

3 ~ DC Audio 5.0K @1.0 

2 ~ PPI 3 way sets (not installed yet)

1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4

4 ~ CT Sounds 5.25" Strato comps  (rear fill only)

1 ~ XS Power D4800

1 ~ XS Power D3400

8 ~ XS Power XP3000

160 stock alt, Mechman 370 Elite, 185 DC Power

320+ Sq. Ft. Sound Deadener

Pioneer AVH-X5500BHS

Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0

Posted

Thanks for the advice. Looks like I will be going with ofc. I completely agree I don't want to buy more wire down the road so I will just spend the money now. Can't wait for payday.

Posted

Lol it's all good. I am only running my amp at roughly 500 rms right now so the 4 gauge will work for the time being. Can't wait to get new wire though.

Posted

Just wait and get 1/0 and a pair of reducers.. Id rather buy once. I learned my lesson when I bought 4g, then 1/0 cca, now 200ft of OFC 0/1

33y2914.jpg

Team Subsonic Lows


Get your garbage EMF products of my amp bitch


Man....it makes a nice work bench ;)

Posted

Just wait and get 1/0 and a pair of reducers.. Id rather buy once. I learned my lesson when I bought 4g, then 1/0 cca, now 200ft of OFC 0/1

I am definitely going to be patient. My amp can accept 1/0 gauge so that won't be a problem. I was just running the 4 gauge to break in the sub and until I could get the proper ofc 1/0 gauge. The amp is barely turned up and only running at 2 ohms. I appreciate all the advice. I definitely don't want to buy wire twice.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...