Foamyy Thee Squirrell Posted April 15, 2014 Author Report Posted April 15, 2014 as long as you don't use the gain as a volume control underpowering is fine - just dont clip your signal all to hell. the bass knob thing? Well I will have to use that because of the sole reason of I can't have it on 24/7...unless I can get my cousin or someone to build be a switch to turn the subs and such on and off. lol.
MrSkippyJ Posted April 15, 2014 Report Posted April 15, 2014 bass knob can't go higher than the gain, so using that is fine. He was just saying don't try and compensate the lower power by turning the gain up too much. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Foamyy Thee Squirrell Posted April 15, 2014 Author Report Posted April 15, 2014 bass knob can't go higher than the gain, so using that is fine. He was just saying don't try and compensate the lower power by turning the gain up too much. I figure a really badass port will help with that.
ToNasty Posted April 15, 2014 Report Posted April 15, 2014 You need to use 0/1 on that amp not 4 ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers
Foamyy Thee Squirrell Posted April 15, 2014 Author Report Posted April 15, 2014 You need to use 0/1 on that amp not 4 Well I talked to someone else and 4 is fine so yep.
MrSkippyJ Posted April 15, 2014 Report Posted April 15, 2014 they lied...or were wrong. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Foamyy Thee Squirrell Posted April 15, 2014 Author Report Posted April 15, 2014 they lied...or were wrong. My cousin has been doing this since 1993 so I feel safe going with the 4g on this project.
Foamyy Thee Squirrell Posted April 15, 2014 Author Report Posted April 15, 2014 Anyway not arguing on that just wanted to make sure I am not going to blow something up doing a 2k amp on a 2200w sub.
MrSkippyJ Posted April 15, 2014 Report Posted April 15, 2014 me too...also DC audio didn't accidentally put 0g inputs on the amp... F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
ToNasty Posted April 15, 2014 Report Posted April 15, 2014 Your cousin is wrong. There's a 0/1 input on that amp for a reason. You don't need ofc but cca 0/1 is needed. ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers
Recommended Posts
Archived
This topic is now archived and is closed to further replies.