audioque Sam Posted May 6, 2014 Author Report Share Posted May 6, 2014 amp rack, line driver, & d3100's wall set-up. currently has 5/8" threaded rods inside the box around all port corners. while "wall" was being built box has around a gallon of resin inside as well. Link to comment Share on other sites More sharing options...
audioque Sam Posted May 6, 2014 Author Report Share Posted May 6, 2014 are you from illinois by chance? yes i am, located around 1 hour north of St. Louis, MO. Link to comment Share on other sites More sharing options...
pa-pa-platypus Posted May 6, 2014 Report Share Posted May 6, 2014 thought i recognized you from the mattoon show.. i was in the clunker white quiet s-10 This isn't teeball. YOU DO NOT GET A TROPHY JUST BECAUSE YOU SHOW UP. Put the work in and then maybe get the respect when it has been earned 151.6 with single 12 at 41 hz 153.2 with 2 12's at 43 hz power: dd m4 Link to comment Share on other sites More sharing options...
audioque Sam Posted May 6, 2014 Author Report Share Posted May 6, 2014 Yeah, that's the last show i was at. Not sure if i remembered a white s-10 there, probably if i saw it. Link to comment Share on other sites More sharing options...
hispls Posted May 7, 2014 Report Share Posted May 7, 2014 This box did 151.7 in dB Drag. I put it together the night before the show and the day of the show I used a piece of PVC pipe and some gorilla tape to lengthen the port to tune properly. By comparison, this is one that I tried with 3 12's firing forward: This alignment did low 148. I tested rotating the box 90 degrees and it gained about a db and a half firing to the side. If you attempt to seal off the box LMK what you manage to gain. I really want to try to c-pillar wall, but I fear that apart from being able to show off the amp I'll gain little or nothing. Link to comment Share on other sites More sharing options...
audioque Sam Posted May 12, 2014 Author Report Share Posted May 12, 2014 yeah been thinking of a different enclosure as well with possibly new equipment after i test with what i have now equipment wise Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.