reinke Posted March 19, 2008 Report Share Posted March 19, 2008 Product:crunch pzi 1500.1 Manufactured by:maxxsonics P 1500.1 1500W 1-Channel A/B Class Mono Amplifier 375W x 1-Ch @ 4-Ohms 750W x 1-Ch @ 2-Ohms 1500W x 1-Ch @ 1-Ohm Includes Remote Mountable Bass Control Purchased/recieved from:my new jobs sponsorship usually right around $200 Performance = 10 Looks = 9 Customer service = 9 Price = 9 Quality = 10 Availtibility = 10 Over all the final score is a 9 vey nice product. i love the fact that when you clip your signal the light on the bass knob turns from green to red. to me it resembles the sundown line a little. i benched tested this amp and my 2 both do over 1600 watts each at 1 ohms. it is easy to use and very flexible with tons of power for the price. the only down side is i have 1 ran at 1ohm and it gets a little hot, not to much to worry about really but worth letting people know. i have actually found that this amp pushes my 12" lanzars hard enough that i only have to turn the bass knob up about 5 or 6 nothes to really hit hard. ----reference's---- meade916 Link to comment Share on other sites More sharing options...
jayjay6888 Posted April 22, 2008 Report Share Posted April 22, 2008 when you benched it what voltage was it seeing b/c i want to buy because the price is pretty low but everyone says that if it doesnt see that dynamic powering it will only do around half 1 Fi Sp4 18 Crescendo 2k selenium mids audioque supertweets Hifonics for mids and and highs 1/0 power and grounds ---> on the way singer alt and possibly another 2k depending how sub likes 1 2k Link to comment Share on other sites More sharing options...
loganberry Posted May 6, 2008 Report Share Posted May 6, 2008 yea what voltage did u test it at? if i dont get my zx2500.1 i wanna get 2 of these, and can u link them together so you can use 1 bass knob? or do u have to use a rca line thing My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
reinke Posted May 6, 2008 Author Report Share Posted May 6, 2008 15 volts flat. my step dad is a electrical engineer so he did it for me. and no you can not strap these amp, it sucks. so you would have to use the rca bass knob, or buy a crossover with a bass knob. ----reference's---- meade916 Link to comment Share on other sites More sharing options...
Eric B Posted May 6, 2008 Report Share Posted May 6, 2008 15 volts flat. my step dad is a electrical engineer so he did it for me. and no you can not strap these amp, it sucks. so you would have to use the rca bass knob, or buy a crossover with a bass knob.So in real world applications, your not going to see that 1600watts that you tested.. 2007 Chevy HHR LT UNDER CONSTRUCTION 1st Place Loud N Low 2010 MWSPL Finals 3rd Place Xtreme 3 2010 MWSPL Finals Link to comment Share on other sites More sharing options...
loganberry Posted May 6, 2008 Report Share Posted May 6, 2008 yea im not going to get that, lol.......15 volts is higher then my voltage will go with 0 stereo stuff on My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
reinke Posted May 7, 2008 Author Report Share Posted May 7, 2008 at 14.3 we got around 1460. we tsted the voltage so high because that is what my trucks cruises with. it used to be a welding truck and came with a 300 amp alternator and a HUGE generator that i am gonna use for my batteries. it sat at 15.0 with 500 amps of load with his tester ----reference's---- meade916 Link to comment Share on other sites More sharing options...
kentb Posted December 26, 2008 Report Share Posted December 26, 2008 1600w rms each? thats kinda hard to believe for a class A/B amp and only 120amps of fusing New System 2 10" Fi SSD, Sundown 1500d Build I build and design enclosures(cheap price), PM ME Kicker L7 Navigator(plexiglass, fiberglass, aeroport) Build BTL 18" Escalade(plexiglass, battery tray) Build http://www.kentbaudio.com Old System Link to comment Share on other sites More sharing options...
Mac58 Posted September 22, 2009 Report Share Posted September 22, 2009 Yea I have one of these now that Im trying to sell and I can tell you this.. It isnt TOUCING 1500 watts in daily driving... Maybe not even touching a thousand at 1 ohm. It was powering 2 P3 12's and I replaced it with a T-500-1bd amp whos certificate said it reached 750+ rms at 1 ohm...HUGE difference at half the wattage Crunch 'claims' it puts out. Current build: Pioneer AVH-P3100DVD Soundstream EQ RF Components (5 1/4, 6 1/2, 6x9 x 2) Two Fi-BTL 15's One RF T1500-1bd Amplifier T400-4bd XS Power 608 XS Power D1200 Optima Yellow top 34 Soon to come: Another RF T1500-1bd HO Alt 1-6 more XS power 680 Team D.M.V Link to comment Share on other sites More sharing options...
Mikesmith0890 Posted September 22, 2009 Report Share Posted September 22, 2009 this thread is a year old... AlphaDamp Sound Deadening CDL Mat - The best Vibration Damper Ever! I'd hit that so fucking hard whoever pulled me out would be King of England. Lol... looks like we were on the same page. Car-B-Ques suck.ya, tires and paint burning make the marshmallows taste funny. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.