Jump to content
Sonic Electronix

Planning on getting a small extended cab truck, need input.


Recommended Posts

Posted

I'm getting rid of my.97 explorer and wanting to either get an 03 S10 xtreme, or a Ford ranger.. I like the looks of the s10 inside and out but the ranger looks like it could have a little more room?

I plan on moving everything from my current build into the new truck, 2 SA 15s.and a Soumdqubed 2200. Ill be buying a new 300 amp alternator and head unit for the truck also..

Would the 2 SA 15s fit in either the s10 or ranger or would I have to Wall it off. And would that leave me enough room to have my extra Kinetik in the back?

I haven't seen many build logs in small extended cab trucks but the ones I've seen they were mostly blowthroughs..

Posted in the wrong place had to repost.

'97 Explorer
2 Sundown SA 15's

SQ 2200D

Kinetik KHC1800 (Front)

Kinetik KHC 2000 (Back)

KnuKonceptz 1/0 OFC

130A Alt + Big 3

Posted

I have a 98 s10 extended cab and the max dimensions behind the seat with the seats all the way back are approximately 48" wide, 12-14" deep, and to the bottom of the rear window is about 24" tall. Might help you out a little

Posted

Yeah I dont mind if it goes above the window a bit no biggy.. where should I have the port fire? Towards the front of the truck, towards the roof, towards the 3rd door?

'97 Explorer
2 Sundown SA 15's

SQ 2200D

Kinetik KHC1800 (Front)

Kinetik KHC 2000 (Back)

KnuKonceptz 1/0 OFC

130A Alt + Big 3

Posted

Mmm I would guess firing towards the 3rd door would be louder..

'97 Explorer
2 Sundown SA 15's

SQ 2200D

Kinetik KHC1800 (Front)

Kinetik KHC 2000 (Back)

KnuKonceptz 1/0 OFC

130A Alt + Big 3

Posted

Would it be possible to build a box with "changeable" Aero ports.. I would prefer to have one for daily tuned to about 30-32, then have one for comp tuned higher around 38-40?

Or just build 2 different boxes?

'97 Explorer
2 Sundown SA 15's

SQ 2200D

Kinetik KHC1800 (Front)

Kinetik KHC 2000 (Back)

KnuKonceptz 1/0 OFC

130A Alt + Big 3

Posted

I designed a box for 3 15s below the window line in an s10 an helped build it, an did a 152 on the dash an 153 in the kick. All below the window

My build

98 s10 2.2

3 american bass HD 15s with psi soft parts. (on there way here)

atomic at-3000.1 (soon) 146.2 outlaw @39hz., bad alt an bad batt when termed (old 2 12" build)

alpine 6.5s in doors

infinty 4x6s in dash.

clarion cz201 HU.

mechman 240a H/O alt

stuff i still need.

SHCA 2/0 wire

SHCA 1/0 to 2/0 adapters

Atomic AT-3000.1

Lots of sound deadner

new mids an highs, still debating on what to do.

A few Deka g31 batts.

Posted

What was the size of the box? Net cuft?

'97 Explorer
2 Sundown SA 15's

SQ 2200D

Kinetik KHC1800 (Front)

Kinetik KHC 2000 (Back)

KnuKonceptz 1/0 OFC

130A Alt + Big 3

Posted

lots of loud below the window line in both trucks. steve notsmd mead(watched it do a 159.9 ), brian's audionerdz ranger before the blowthrough did like a 62, joe price is in the low 60's aswell. David Berger built a crazy ass one too.

Note, at Heatwave I sat next to Steve notsmd Mead's s10, like 10 ft away, while he was burping it outlaw style...around 52hz, hurt like a mother fucker. bounced my phone and keys off the icechest, rattled my throat.

On 1/4/2013 at 9:31 PM, HatersGonnaHate said:

Wow. 184 posts and I think you're a fucking asshole.

 

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 753 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...