AstoSoup Posted December 22, 2014 Report Share Posted December 22, 2014 I just built a new box and bought another Powerbass 3XL 152D (Not the new black/grey style). Have been running a Hifonics BRZ1700.1D on the one and have had pretty good luck. I figure the BRZ is giving the sub between 1300-1500RMS after rise, on 14v constant. However, I am seriously doubting this amp will power these subs, even at .5ohm so I am going to need a new amp after I break the new sub in. Looking at the Lanzar OPTI2601D. Have heard a lot of good things from people, but pretty much just things like "they power my subs nice", etc. What I am wondering is, will the amp actually do the rated 2600RMS @.5 like they claim? I do know the 2000D will do a little over rated, they actually clamp tested that one. Would like around 1200RMS CLEAN power to each sub, without throwing my wallet out in the window lol. Needs to be a .5 or 2ohm load, so the 2601 fits the bill. So hopefully good news on the OPTI, but tell it like it is guys! Thanks! Head Unit - Clarion VX709 7" DVD Touchscreen Mid/Highs - Front Doors - RF Prime 6.5" component mids. A. Pillars - RF Punch component tweets. B. Pillars - RF Prime component tweets. Rear Doors - RF Punch 5.25" mids. RF Punch 3-way passive X-overs. Mid/Highs Amp - MB Quart Onyx 360.4, 4 channel, 640W RMS. Subs - (2) PowerBass 3XL 15, 1000w RMS, 3" flat wound coil, 562oz motor, 10" spider. Sub Amp - Audiopipe GD6001 @.5ohm, clamped 2825RMS. Box - 9.6 cu^3 net @35Hz, three 6" aero's. Charging - Energizer 120Ah AGM under the hood, MaxLife 75Ah in the rear. Big 3, 140A aftermarket alt. (off brand) Wires - Two JL Audio 2/0ga OFC. runs to rear, 4ga. power/2ga. ground to component amp (OFC), 1/0ga. OFC Knu Konceptz Kolossus Kandy everywhere else. Link to comment Share on other sites More sharing options...
MatthewBigBossWilliams Posted December 22, 2014 Report Share Posted December 22, 2014 You could just do what I did and get a cresendo s1500. Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted December 22, 2014 Report Share Posted December 22, 2014 Lanzar= garbage, spend your money on something better. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
MatthewBigBossWilliams Posted December 22, 2014 Report Share Posted December 22, 2014 Lanzar= garbage, spend your money on something better. I don't think Lanzar is garbage. I heard their Opti line is actually legit. Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted December 22, 2014 Report Share Posted December 22, 2014 it's garbage, I could couldn't care less if the opti is or isn't garbage Since the company as a whole is shit. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
MatthewBigBossWilliams Posted December 22, 2014 Report Share Posted December 22, 2014 Well it is pretty messed up to talk shit about a company on any board. Anyway OP I used a cresendo s1500 on both my coils and got the dd1 and cc1 and it worked better for me. http://www.stevemeadedesigns.com/board/topic/192246-amp-suggestions/?hl=+matthewbigbosswilliams refer to that. I asked the same question already Link to comment Share on other sites More sharing options...
AstoSoup Posted December 23, 2014 Author Report Share Posted December 23, 2014 I wouldn't call the company garbage entirely, have seen the OPTI 1537's do some amazing numbers.... Also know the OPTI 7k is one beast of an amp, just wondered about this particular model. Head Unit - Clarion VX709 7" DVD Touchscreen Mid/Highs - Front Doors - RF Prime 6.5" component mids. A. Pillars - RF Punch component tweets. B. Pillars - RF Prime component tweets. Rear Doors - RF Punch 5.25" mids. RF Punch 3-way passive X-overs. Mid/Highs Amp - MB Quart Onyx 360.4, 4 channel, 640W RMS. Subs - (2) PowerBass 3XL 15, 1000w RMS, 3" flat wound coil, 562oz motor, 10" spider. Sub Amp - Audiopipe GD6001 @.5ohm, clamped 2825RMS. Box - 9.6 cu^3 net @35Hz, three 6" aero's. Charging - Energizer 120Ah AGM under the hood, MaxLife 75Ah in the rear. Big 3, 140A aftermarket alt. (off brand) Wires - Two JL Audio 2/0ga OFC. runs to rear, 4ga. power/2ga. ground to component amp (OFC), 1/0ga. OFC Knu Konceptz Kolossus Kandy everywhere else. Link to comment Share on other sites More sharing options...
AstoSoup Posted December 23, 2014 Author Report Share Posted December 23, 2014 Well it is pretty messed up to talk shit about a company on any board. Anyway OP I used a cresendo s1500 on both my coils and got the dd1 and cc1 and it worked better for me. http://www.stevemeadedesigns.com/board/topic/192246-amp-suggestions/?hl=+matthewbigbosswilliams refer to that. I asked the same question already How much was the Crescendo? Have always loved their amps but thought they were quite pricey.... Head Unit - Clarion VX709 7" DVD Touchscreen Mid/Highs - Front Doors - RF Prime 6.5" component mids. A. Pillars - RF Punch component tweets. B. Pillars - RF Prime component tweets. Rear Doors - RF Punch 5.25" mids. RF Punch 3-way passive X-overs. Mid/Highs Amp - MB Quart Onyx 360.4, 4 channel, 640W RMS. Subs - (2) PowerBass 3XL 15, 1000w RMS, 3" flat wound coil, 562oz motor, 10" spider. Sub Amp - Audiopipe GD6001 @.5ohm, clamped 2825RMS. Box - 9.6 cu^3 net @35Hz, three 6" aero's. Charging - Energizer 120Ah AGM under the hood, MaxLife 75Ah in the rear. Big 3, 140A aftermarket alt. (off brand) Wires - Two JL Audio 2/0ga OFC. runs to rear, 4ga. power/2ga. ground to component amp (OFC), 1/0ga. OFC Knu Konceptz Kolossus Kandy everywhere else. Link to comment Share on other sites More sharing options...
evermaxx Posted December 23, 2014 Report Share Posted December 23, 2014 299 shipped iirc. i have a bnib ct1400 for 350shipped. Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
MatthewBigBossWilliams Posted December 23, 2014 Report Share Posted December 23, 2014 In the long run I think it is worth having. I dont mind using the two coil thing. saves me money Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.