Best way to get most power out of system

[garton05]

Dc 240 amp alt

Alpine IVA-W205 head unit

AQ 2200 amp. 4ohm 770 watt 1 ohm 2200 watt

Phoenix Gold titanium elite 12d sub. Peak 2000 rms 1200

Kinetic hc 3800 watt battery in the back.

The big 3

The sub has dual 3 ohm voice coils wired in parallel.

Do I have the sub wired correctly?

What ohm am I trying to get to make the best power?

[Miguels]

i think the best you can get is 1.5 ohms if you have 1 sub

[garton05]

How do I get that? Do I need a volt meter to tune it or what do I need?

[islandpride684]

Where did you get 3 ohms? On their website they have a D2 and a D4...do you mean 3" coils?

http://www.the12volt.com/caraudio/woofer_configurations.asp

[garton05]

This Phoenix gold is a Ti 12d elite. Says under measured T/S parameters. Nominal impedance (ohms) 2. Revc (ohms) 1.52. Both 3 ohm voice coils wired in parallel.

[garton05]

I mess up its dual 4 ohm 3" voice coil

[islandpride684]

I mess up its dual 4 ohm 3" voice coil

Just making sure...wire both subs in parallel which will give you a 1-ohm load, use the link above...

[rockFord_Expedition]

I mess up its dual 4 ohm 3" voice coil

Just making sure...wire both subs in parallel which will give you a 1-ohm load, use the link above...

Didn't he say 1 sub?

[Jhunt94]

I mess up its dual 4 ohm 3" voice coil

Just making sure...wire both subs in parallel which will give you a 1-ohm load, use the link above...

Didn't he say 1 sub?

I believe he did, which means he'll be sitting at a 2 ohm load.

[islandpride684]

On his sig, he listed 2, so I'm assuming he has 2...