Black Beauty Project Build - 06 Ford F-250 Super Duty 1/27/18 - New pics starting on page 41

scooter99 · January 28, 2018

So this is where those screws that I used to glue and screw the panels together, kind of bit me in the ass. Some of them were right in where I drilled for threaded inserts.

IMG_1196 by Scott Carver, on Flickr

IMG_1197 by Scott Carver, on Flickr

IMG_1199 by Scott Carver, on Flickr

Gasket material for the port and the subs.

IMG_1200 by Scott Carver, on Flickr

THIS, is where shit gets real!!!!!

IMG_1201 by Scott Carver, on Flickr

IMG_1203 by Scott Carver, on Flickr

IMG_1205 by Scott Carver, on Flickr

IMG_1207 by Scott Carver, on Flickr

IMG_1208 by Scott Carver, on Flickr

scooter99 · January 28, 2018

So I sort of ran into a problem while putting this in here. It's a bit tight!!! LOL This was the mockup stage. I need to make sure that I can get this in and out easily and this is not how to do it.

IMG_1209 by Scott Carver, on Flickr

IMG_1211 by Scott Carver, on Flickr

But it was in so I marked it up and get it ready anyway.

IMG_1213 by Scott Carver, on Flickr

The fit is nice. Exactly what I wanted.

IMG_1214 by Scott Carver, on Flickr

IMG_1216 by Scott Carver, on Flickr

IMG_1218 by Scott Carver, on Flickr

Now then I had to get it out. More creativity.

IMG_1219 by Scott Carver, on Flickr

IMG_1220 by Scott Carver, on Flickr

IMG_1222 by Scott Carver, on Flickr

52738834218__15024F09-1E2E-43D1-A953-868B9FC7AA07 by Scott Carver, on Flickr

52738844569__C6A2AAD9-48FA-4DFE-B4DA-4F87286529A2 by Scott Carver, on Flickr

scooter99 · January 28, 2018

So after I pulled the enclosure out, I figured out what was going on. That damn filler that never really hardened up, stuck on the wheel wells.

IMG_1226 by Scott Carver, on Flickr

IMG_1227 by Scott Carver, on Flickr

IMG_1228 by Scott Carver, on Flickr

IMG_1231 by Scott Carver, on Flickr

IMG_1232 by Scott Carver, on Flickr

my fix plan

IMG_1234 by Scott Carver, on Flickr

IMG_1235 by Scott Carver, on Flickr

IMG_1236 by Scott Carver, on Flickr

IMG_1237 by Scott Carver, on Flickr

IMG_1238 by Scott Carver, on Flickr

scooter99 · January 28, 2018

Time to work on the port.

IMG_1239 by Scott Carver, on Flickr

IMG_1240 by Scott Carver, on Flickr

Not gonna lie, this got me super excited!

IMG_1241 by Scott Carver, on Flickr

IMG_1242 by Scott Carver, on Flickr

GOODIES!!!! Except for the fact that the lugs didn't get sent. But, it is what it is. Got it taken care of.

IMG_1244 by Scott Carver, on Flickr

IMG_1245 by Scott Carver, on Flickr

So since the whole incident with the enclosure getting stuck I had to kind of rethink my bed-liner idea. So I went with an exterior paint.

IMG_1247 by Scott Carver, on Flickr

IMG_1248 by Scott Carver, on Flickr

IMG_1249 by Scott Carver, on Flickr

scooter99 · January 28, 2018

Now for the enclosure.

IMG_1250 by Scott Carver, on Flickr

IMG_1251 by Scott Carver, on Flickr

IMG_1252 by Scott Carver, on Flickr

IMG_1253 by Scott Carver, on Flickr

IMG_1254 by Scott Carver, on Flickr

IMG_1255 by Scott Carver, on Flickr

IMG_1262 by Scott Carver, on Flickr

IMG_1263 by Scott Carver, on Flickr

Since I don't have any lugs, I can't put any cables together. However, that doesn't mean I can't get the cables cut and ready.

IMG_1258 by Scott Carver, on Flickr

IMG_1259 by Scott Carver, on Flickr

scooter99 · January 28, 2018

Now I had to come up with a plan for fuses. I liked how everything else turned out in this build, but this is probably my favorite part. Even better than the port that I loved and was so excited about.

IMG_1260 by Scott Carver, on Flickr

IMG_1261 by Scott Carver, on Flickr

IMG_1264 by Scott Carver, on Flickr

IMG_1266 by Scott Carver, on Flickr

IMG_1267 by Scott Carver, on Flickr

IMG_1268 by Scott Carver, on Flickr

IMG_1269 by Scott Carver, on Flickr

IMG_1270 by Scott Carver, on Flickr

IMG_1271 by Scott Carver, on Flickr

IMG_1272 by Scott Carver, on Flickr

IMG_1273 by Scott Carver, on Flickr

IMG_1274 by Scott Carver, on Flickr