Carnines Posted July 5, 2015 Author Report Posted July 5, 2015 Ahh. Yeah the Titans are rather fat. I'm assuming just an extended cab due to the 24 length. Yes exactly.
reedal Posted July 5, 2015 Report Posted July 5, 2015 Up to the window line? SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Carnines Posted July 5, 2015 Author Report Posted July 5, 2015 Up to the window line? Yea.. id probably want to drop the height an inch or two so subs dont move past the window line and the length would probably be around 17 after measuring again(it has an odd hump in the back I didn't account for).
reedal Posted July 5, 2015 Report Posted July 5, 2015 Counter sink the baffle, baffle up to window line. Make sure all measurements are absolute. If you have any spare junk plywood or something laying around you can use it to model out if your length/width are good. Better than buying, building, and finding a surprise even after double checking measurements SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Recommended Posts
Archived
This topic is now archived and is closed to further replies.